HAPPY NEW YEAR!!!! Is it possible to bolt on a power steering pump to a 414 that currently doesnt have one? I found a 414 with a loader for a very, very cheap...
After trying to split my 3414 over a week, thanks to Chris imadogedriver and a factory parts diagram he sent me, I got it apart. For anyone trying to split one...
Brian, When I purchased my B414 the first order of business was to move the muffler under the tractor. This was done for two reasons. One is I use the...
I would suggest checking out: http://www.buhler.com/sitefiles/index1.htm. Buhler manufactures Farmking snowblowers and Allied loaders. They recommend either...
Brian, The parts catalog shows the B-275 uses pump number 704330R9*. This is the same as the B414. The pump is rated at 2500 PSI or 2.5 GPM (imperial) @ 1000...
Hi Terry, Question for you about what you found when you had the sleeve out of the block on your tractor: Was there brazing between the cylinders on the block...
Sorry Eric, I did not notice any brazing. I wasn't looking for it either. I had planned on taking some pictures of the tear down and rebuild but I forgot my...
Thanks Terry!!! Can I install power steering and an extra remote on my 414 that currently does'nt have either? If yes, where can I buy or obtain directions on...
Sorry, I don't know the answer to your questions. One option might be to tap into the pressure side of the pump and add an auxillary valve (Make sure you use...
Terry thank you to the reply to both questions, I do bereave I will put my exhaust under the tractor, as for the pump I think that it is working fine, I wanted...
OK now I think I really have a problem. I installed a new oil pressure gauge today and started my B275, The pressure was 20lbs at start up, and after the...
I don't think u have a problem there, my B275 has done the same thing for as long as i can remember. i've had my copy for 10 years now and it runs beautifully....
My B-414 was behaving the same way before I rebuilt it. I believe my problem was worn main and rod bearings. Have not had a chance to really warm it up since...
Hi all, I just joined the group. I live in the middle Norway and I use my 414 a lot. It is a diesel and it has an loader. I've uploaded some photos too the...
Hi all I have some copies of the IH B250 and B 275 serviceman's guide it is 60 pages price is 20.00 US plus shipping if you need a good manual email me at ...
Nice to find a site related to my 414. I live in Minnesota and it gets pretty tough to find people that know anything about these tractors. Mine is great and...
Hello I have a B-275 and I was ploughing or actually pushing some snow with a blade on the 3 point. Got a very sore back from controlling the lift while...
Terve Jimmen! I actually had the same problem with my back, so i moved my blade to the front instead and put an extra hydraulic double action valve so i can...
I'm working on a B414 Gas & the battery has the positive terminal going to ground & the negative terminal going to the starter relay. Isn't this backwards ?...
Hi, if it starts and runs fine it would have to be right. Recon it is a different starter? I suppose the cables itself hadn't been replaced and they just got...
This is standard on British tractors of the day. Your amp gauge should show charging on the left side of the gauge and dis-charge on the right side. ... From:...
Many of the old cars and trucks were also designed to have positive grounds. As long as the whole system is designed this way it operates just as well as if it...
I was thinking of machining an oil filter spin on recepticle instead of the existing unit. Does anyone know if the existing unit is a full flow or does it just...
Thanks for all who confirmed the positive ground. I'm planning to add some lights, should my hot wire go to the negative terminal then ? ... operates ... jump ...
Yes, you might do all connections just like usual, The lights and relays are quite dumb, they don't know in what direction the current flows. I was a bit...
Im thinking about upgrading my 414 tractor, but I found that not many petro models we're made. Just wondering if anyone can give me any insight as to if these...
I've got a skid of new starters in for Fiats and David Browns... and British IH B Series models that use the starter with the mounted electric solenoid. This...
After chasing transmission parts on the net for about a month, I recieved a valu-bilt tractor catalog in the mail yesterday and low and behold, they had the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
