About a month ago I purchased a 1960 B275 diesel in good running working shape, it had bad fenders, beat up grill, was missing the dash lower flat piece, the...
My 275 has a LOT of play in the steering...Kind of frustrating, so it definately needs to be gone through...It doesn't look like a quick easy task, i have all...
The little pin by the middle hitch point is connected to the hydraulics. It will put down pressure on the lift arms when plowing and the like. The adjustment...
You might first tighten the steering housing to the tractor proper. There are four large bolts that anchor it to the top of the transmission. They will cause a...
I have a lot of up & down play in the steering column & would like to tighten these bolts if possible. How would I get at them to check & or tighten. I expect...
Bates has a kit that is pretty good. I did mine, but found many rusty surprises inside the box. You have to pull the fuel tank. Then pull off the old...
Hello everyone, thought I'd post this here in case anyone is interested. I have decided to sell my 275 so if anyone is interested, the tractor is located in...
There are four of them under the tank...fairly easy to get to. I don't remember the bolt size, but they are fairly large maybe 3/4" bolt heads. Good luck. ... ...
I have put a pic. in the photos. Named B-275 for sale by Donnie Berend. I can take more and send to anyone interested. Thanks! ... interested. ... just ... the...
And, for some reason, the pic was put in Stump's album. Email me for more pics and info. Located near Wichita Falls. Price is neg. Sorry Stump! You can remove...
Tristan, I tried on the internet to find the steering box rebuild kit from Batescorp.com, but I had no luck finding it. Do you have a part # or some other way...
I don't believe they have it online. Bates has quite a bit more parts than what is listed on their site. It's a 2 bearing kit with races... I'd call them and...
http://www.wengers.com/parts/Farm-Tractor-Parts/International-Harvester/B414/B414/Steering/Manual-steering/STEERING-BOX-ASSEMBLY/01-708423R.A.htm This place...
The box is tight, it is just worn out. The sector inside has jumped a tooth so that I can turn sharply to the left, but it takes 5 acres to turn to the...
If you remove the tank and steering box, you'll see that it's a simple contraption. A worm gear and a fixed 'pivot bar' that rides along the worm gear,...
You need to know a few facts of deference in the to tractors if you intend to make one out them both.A 414 is longer than a 275 (fuel tank makes up lenght in...
Hi ! My B275 had exactly the same kind of steering when I bought it seven years ago. First thing I did was putting an servo on it but it did not help at all....
Thanks for the info...My 414 is actually pretty complete, im thinking of keeping both running and working...Keep one at home and one for hunting camp...The 414...
Does anyone know where to get the british pipe fittings ( in the US) used on the b414 hydraulic system? If there were adapters available, that would work...
Most shops that make hydraulic hoses will have fittings that you need. They can put the British pipe fitting on one end and anything you want on the other...
Hi all... Preparing for the first big snow last december, it appears that I blew out the governor and the linkage to my carb all in one shot. All that ...
Given my earlier description below concerning my 64' B-414, can anyone recommend someone in the mid-Michigan area that does such repairs, especially if they do...
Thanks, I didn't know they were that common. Steve greg marshall <marshallgreg@...> wrote: Most shops that make hydraulic hoses will have fittings that...
What are options for tire size on the B-414? I think 6.00-16's were standard on the front and 13.6-28's standard on the back. But when I bought my B-414 it...
Hi Chris the standard tyres fitted were 600x16 on the front 11x28on the rear although ohter sizes were available including 4.00x19 fronts 10x28 rears and rear...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
