... it ... bite ... but ... Hello , Gordon,. I have the original Top link -13 " body and lock nut + 3 " for the small end and 4" for the big end. This one is...
I have noticed several 5 port orbital valves on ebay, but no 4 port valves. Is it possible to use a 5 port valve for a power steering retro fit? If so, where...
Thanks Louis, This is a great help. My local supplier has one which is just over a foot long, however he says it is a cat 2 linkage and it has two large bore...
-HI...Kevin For me ,I use to fix standed 12v bulbs and indicating meters such as charging..,temp, commanly avail in market. I check size and working voltage...
I was trying to find a parts listing for my B-275 and thought to check out the CaseIH site. http://www.caseih.com/home.aspx?RL=ENNA In the bottom right hand...
Hi, I have really enjoyed reading the various posts and viewing the photos contained on this site. I was wondering if anyone could point me to a source for...
I was wondering what battery people use for their tractor. When I bought my tractor there was a a simple AutoPro 12 volt battery in it. I was told that the...
The original battery system in these tractors was 2- 6 volt batteries connected in series. I have replaced 2 batteries in mine over the past 22 years and used...
The original batteries in the early B-414's were 2-6 volt batteries, but I think they got awau from that later, in the U.S. anyways. Mine came with a single...
Mike there is a company on e-bay that sells decals for B250s, they are out of the UK. They said they had decals for the B414. The price was under $100 ...
check out this site, I got decals for my B250 from this guy http://www.tractor-panels.co.uk/index.asp ... are out ... under $100 ... http://www.aol.com...
Hi, I'm Jens Vägar from Finland and I own a B275 from earlie 60's. As many other I having problem with the glow plug resistor. In fact the resistor was...
I have a new resistor, It has been installed in the dash but no wires have been hooked up. I went to the Bosch fast glow plugs. $50 US will include shipping...
I ordered the resistor from SSB Tractor parts on line about 5 years ago & it has worked fine, however they don't show to stock them at this time. I remember...
Hi, I has tried SSB Tractors as well but they havn't the resistor in stock anymore as it seems. So I'm still looking for the resistor. But thanks for the hint...
Anyone know the size of the banjo bolts on the B-275 fuel filter? I need to replace both leaking fuel lines and want to plug the holes during the repair to...
... 13mm banjobolts to this size by puting them up in an lathe on a 6mm pin in and resized the outer diameter. An die plate gave good treads since it was...
Hi team, I have just purchased A 1 owner B275 complete with original manual. However I have a problem that for the life of me I cannot figure out. On the right...
The lever you are refering to sounds like the optional extra ( quite rare) 2 speed p.t.o. selection lever.The speeds are 540 rpm and 1000rpm the central...
Hi I have a 276 with the BD144 engine. It ran somewhat noisily, with a loud ticking. Starting was fine with perhaps a mis-fire for the 1st few seconds. On...
Hello Andy, Thanks for the info I will try it out and see how it works. Regards Bruce ... From: Andy bury To: internationalbseriestractors@yahoogroups.com ...
This will be due to a previous overheating off the engine, the cylinder head expands and "lets go" of the pre combustion chamber then causing it to come loose...
Classic Tractor issue November 2007 number 79 has a 5 page article written by an ex employee of I.H.GB. Michael Bowen tells his story of involvement in the...
Hi, not sure if this is the one you mean. http://stores.ebay.co.uk/M-HIPPERSON-VINTAGE-TRACTOR- SPARES_International_W0QQcolZ4QQdirZQ2d1QQfsubZ7QQftidZ2QQtZkm ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
