I live near Dayton, OH and plan to sell a B414 diesel. I bought it this summer and it's going to need some work which I don't have time to do right now. When...
I Recently replaced my starter with a modern one with selonoid on starter and had to rewire after removal of old selonoid and i think there were wires to...
Hamptonsport, I live in Fairfield, OH and may interested in the tractor and loader. I need a project to do for the winter. Send me your phone number or call me...
Glenn, I installed a tank heater on my B414 a couple years ago. It has performed well in North Dakota climates (-25 F this morning). I mounted it right in...
Well, I finally got my tractor back together. I've posted some photos of the torn down steering box under kragnesb414. The machine shop did a good job of...
I have a 1960 Gas-B275 IH Gas with a failed starter. I had the orginal starter completely rebuilt last spring & it has failed again. The alternator had been...
Hi, Try this web site out for a cross reference: http://www.luckyconsultancy.com/lukas_m45_e.htm I have a B275 Diesel. It is a 12 volt from the factory....
In case anyone is looking for parts, there is an add on E-bay for parts from a '63 B414 Diesel-- 4 States Salvage Bone Yard is the name of the store, looks...
I have a complete B275D, running for sale in KY, USA $3000 is the asking price. Starter needs to be rebuilt but pop starts with no problem. Engine has good...
I loaned a buddy my tractor and he steped on the little adjuster screw under the seat. It is a bolt with a diamond on either side . it immediatly started...
I have a complete B275D, running for sale in KY, USA $3000 is the asking price. Starter needs to be rebuilt but pop starts with no problem. Engine has good...
Hi Robert Thanks for your info & cross reference guide that may come in handy. My B275 gas is a 144 Cu in Engine as well & may have the same generic starter....
Glenn i have installed the heater in bottom rad hose works great ,i am in eastern Canada and it gets cold here ,but have no problem starting Jim ---...
Hi Glen I'm looking for a replacement starter for a B275 as well. Have you had any sucess in finding a cross reference to the AC Deleco or other NA models. My...
Wondering if anyone can tell me how big a job it is to remove fuel tank ,i have cab on my b275 and i am hoping i don't have to remove it to get fuel tank...
Jim I had to remove my tank several years ago. I've forgotten the exact placement of the bolts, but I seem to recall removing the battery support behind the...
Recently pulled the glow plugs on the IH 3414 that I'm working on and they are fried. I think the previous owner may have run straight 12 volts on them. What...
Look back through all the posts. There was a good issue on glow plugs. I don't re-call how long ago but it may have been as far back as 2 years or more. ... ...
Jim, Just had mine off my B-414 before Christmas. Because of the way the steering column goes through the tank, I believe you will likely need to remove your...
Franklin, I think the post Frank was referring to was message #866. You should find it helpful. Basically, the glow plug indicator in on the dash reduces the...
Hi guys. I was wondering if any of you ever experince carb ice on the b275. I find that on cold days with precip. I get ice built up on the carb and the...
I have a B414 that I am putting up for sale. I pulled it out of a pasture a few months ago with the mindset of getting the old thing going again. My dad bought...
Hello, Does anyone know where to get a new or rebuilt B414 Lucas distributor? Mine is very sloppy, and difficult to set an accurate timing. The only parts I've...
i priced a dist from Road Builders in KC. Kansas they are the IH construction equipment dealer $355. 00 so i rebuilt mine the bearing under the point plate...
TERRY' tks for the info ,i think i will try the vacume befor i try and remove tank ,,it definetely is alot involved in removing it,tks for the info really ...
I just bought a 275 that has sat for several years,I cant seem to get fuel to pump out of the injection lines. I used the hand primer and bled off the air at...
Hey there. I'm no expert on the matter, but when I was looking for dist. parts I found that there was a lot of parts dealers had listings for the b414 when...
Hi guys,i'm a member of your site hear and have been for a few years,since i got my B-250 ALMOST 2 YEARS AGO.A few months back i was surfin the net and came...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
