Thanks Jeroen, the disks are not the ventilated ones unfortunately, just the cast iron rotor on aluminium carrier, and looking at your photo, it would appear...
Hi Simon The HRC fork seals are the same as the standard parts, without the wipers.( a separate part). For what it's worth, I have not run across an RC30 seal...
Thanks Jim, that's great info and good news. I was confused because the part numbers are different ...... I guess because the standard seal kit comes with the...
Try GPStar in Hollywood. They usually have some Jap import models that are US legal and Real US models. Probably have some NR750's too if you really feel that...
I am aware of two Rc45's available. One is brand new in the crate very expensive but very exclusive, the other is a well maintained bike with approximately...
Hi Jim ....... believe it or not, the local Honda dealer here had the seal kits at 15 bucks each!! Cheers ....Simon Simon Graham <graham_simon_p@...>...
Contact Elias at GP Star. Al _____ From: hondarc30ownersclub2@yahoogroups.com [mailto:hondarc30ownersclub2@yahoogroups.com] On Behalf Of mrgreenrc Sent:...
Hi All, Just flicking through my old snaps & I found this one (from 99?) : http://www.vfr750r.com/pics/DCP_0044.JPG Thats Bray Hill on the left. I'm the one...
Simon, I have a HRC shock on my race bike. I can't see all of it for marks, but there does not seem to be any special differences from the standard unit. One...
Hi, I'm going to buy a front head stand for a 30 and 45, I want to get one of the ones that lifts with a pin through the bottom yoke. Does anybody know the...
I use a Pitbull front stand, which is adjustable for different steering head diameters. Here's some info on the front wheel swap if this is what you're looking...
... Hi Chris- I use Pit Bull stands for front and rear for my RC30's and am pleased with both. I am not near my stands until Wednesday but can let you know the...
Chris, I have the pit bull stand with correct pin. I have used it once, works great. I no longer have the bike (bummer) but the stand is in the garage...
Hi all, can any one tell me the size of the big nut on the driven side of the axle please? Had a rough measure and it looks about 46mm to me but it would save...
Kent- Hi there. I am sure you've had a few emails from RC owners wanting to pick up a front stand...well here's another! If you need a buyer, let me know....
I still have a few parts to sell. 1 Kerker exhaust, and a battery that holds a good strong charge. Both came off my RC30 as I put it back to stock this year...
Hans Stuck at the 'Ring in the BMW Team 2004 M3 GTR. http://www.bmwtransact.com/microsite/Nurburgring/ 2 laps around the short track to heat up the tires and...
Hi Pete, I checked my tools and the drive nut is a 46 mm.The socket fits a little loose and I suspect the nut is something like a 45.5 mm. If you check the...
Try contacting David Silver Spares, they had a few unpainted original Honda ones without screen for 200ukp + VAT Might be less expensive than shipping halfway...
I got my penske in today(thank Nick) and i would like to know how far up i need to raise the ride height for the 17" rear wheel? It is now about 5-10mm out,...
Hey Vic, great link! Did the 'Ring earlier this year, but not on the 30 and nowhere near that pace!!! Good memories of the big course though.... ... flying lap...
Hi Vic, Well Hans certainly did not get Stuck.... I've done a fair number of laps on the Nordschleife, maybe 80 or so on various bikes (didn't own a 30 in...
I have a Penske shock on one of the 30's in my shop now. There are three versions of shocks available. This one is the top of the line hi/low speed adjustable...
