It's on fleace bay. http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ViewItem&rd=1&item=320244454600&ssPageName=STRK:MEWA:IT&ih=011 or if you prefer: 320244454600 A bit...
I don't know for sure if the RC30 connector is the same, but the part number that fits the VFR750F (RC36) reg/rec is definitely 32110-MW0-305. I know because...
Hello fella's, Had the same problem ages ago and instead of using any connectors I just soldered it straight through. The only time it can be a pain then is if...
31105-ML8-305 is the Goldwing replacement connector, with yellow/black wires. It is a three pin connector as required by an RC30 regulator. Jamon ... From:...
Hi guys, Last appeal for a set of (known-to-be-perfect) OEM RC30 carburetors to suit a UK / European model. Hopefully someone may have a spare set that they'd...
I have a set of US 49 State US carbs. They were a take off from a RC that went AMA Racing in 1990. I also have the air box, back fire screen, plus lots of...
Okay, sorry for the confusion, then. The part number didn't come up on Ron Ayers, so I thought it might have been garbled. In any case, between 31105-ML8-305...
Has any one come across this mod before? I took apart the cam gear quietening springs and found that one locating pin had been fitted in the next [ inner ]...
RCFIRDY, You can just email me and I will show you all the decals and the prices. Thanks! Adam Wisconsin USA hondarc30ownersclub2@yahoogroups.com, "rcfirdy"...
Hi all , i wish to inform you that i have a BRAND NEW kit of pistons. The kit is complete with rings , and his piston pin. cannot translate in english exactly,...
Hi Dave, Another one for your collection? How can you tell if it is fully restricted? See ya soon (but not this weekend as I am over in Ireland) All the best, ...
Hi Adam, Could I have a list too please? Thanks, Mick Portsmouth, England Adam <adam.stone@...> wrote: RCFIRDY, You can just email me and I will show you...
Hi. Just bought myself an early Jap.spec RC30. Have recently fitted it with PVM 17" Magnesium wheels. But the airvalve is too long and scrapes the Brakecaliper...
Hello and welcome You will have to adjust the brake torque arm to clear the valve stem. If splinters = splines, then yes, that will work. It will move closer...
How much more oil can I put in the front fork without causing damage? Or can I put a small spacer inside to make more preassure on the spring? /Tom ... From:...
The stock springs are so soft that pre-loading them(with shims as you suggest) might do more harm than good. The method for this is usually to check sag, the...
I have actually ordered some linear springs today, Öhlins or Wilber. New shims and oil. But for tomorrow, it will do with harder compression and 20ml more...
Hi all, on my previous post i did a big mistake. I wrote to have a set of pistons , rings and pins for a 70.2 mm new. it is not true. I did a mistake, they...
HI. just letting people know that HRC has announced that this will be the final year of manufacture for the RS250 grand prix machines.orders will be taken...
