I thought Id give the balancer chain adjustment one more try,..it was a bit loose, I had the dreaded cant get the gears/splines linded up , and droping the T...
"highvoltagedave" <dfb25@...> wrote: " I thought Id give the balancer chain adjustment one more try,..it was a bit loose, I had the dreaded cant get the...
yea, Ill keep workin on it,.....I was pretty PO ! , and had to vent there was a couple 400 A at a salvage yard close to here, Ill have to buy or make a...
- Well, i gots my new T converter, many times, I got it on far enough , so when I put the cover on ,..it would be within maybe 1/8" - 3/16" of seating,... so...
never had this broblem before i repalced the T Converter,..I got it good and hot,..it idles ok,..but when ya put it in gear,..the rpms slowly drop,..then it...
- Im sorry to hear your bike is still in da shop :-( did they ever get it running ? ... never had this broblem before i repalced the T Converter,..I got it ......
- Yo, ive been off that group for awhile,...lots of spam/crap on there,..did they clean it up ??? Well, the whinning noise is prob the balancer chain, that I...
First off, re. "Yo, ive been off that group for awhile,...lots of spam/crap on there,..did they clean it up ???" Well, not "they" perzactly - moi. Same thing...
meh, im back on the road on a 83 450sc nighthawk, its only got 13k on it, and only cost me $800. the bike is spotless and its a 6 speed. lil different from...
I should have swapped the gear with the old one huh ? I know, ITS RUNNING , KEEP YOUR HANDS OUT OF IT ? the whine does seem to be quieting down,..now, if it...
I couldn't agree more: ITS RUNNING , KEEP YOUR HANDS OUT OF IT ! Maybe it's just whining 'cause it feels lonely. So get a nother 'matic already... K(T)W(O)...
1981 CM400A left side plastic cover. Preferrably Candy Sword Blue, but will take anything, in any condition right now just to cover the electronics from the...
what color do you need ... i found a maroon one locally for $45, i think it is a 1980 though Alan ************************************** Get a sneak peak of...
i will do some more research to see what model and year the one I saw was. I know that it had just a pinstripe, and was not two-tone like mine What exact...
I have an '81 Maroon cm400A. I'm not worried about the color because I'm going to have the bike painted soon anyway. I think the '80, '81, '82 400A's are all ...
What does the moderator need help with? ... Got a little couch potato? Check out fun summer activities for kids. [Non-text portions of this message have been...
OK, so I finnaly have the 750 starting better. It seems to be idling rich from the start. The air adjusting screws are only 1/4 turn out from the seats, and...
...when idling you are using the idle jets and to a much lesser extent the main jet. Technically moving the needles should not change the air/fuel mix at...
Do you have vacuume gauges to check the carbs? My 750 had that popping thing going on and I found one of the carbs had twice the vacuume as the others. A quick...
Hi! I just became a Proud owner of a 1977 Hondamatic CB750A, 26500 miles and Vetter Fairings.... It took me a while to find it, but I found one that needed...
Just to say Hi! I just bought a 1977 Hondamatic CB750A, 22k miles and are looking for local contacts in order to ride and exchange knowledge about the bikes. I...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
