Hello Group! I'm looking for a replacement parking brake cable for the 1976 CB750A that I'm restoring. Any suggestions on where I can find one? I've checked...
What do you need from the rebuild kit ? Usually you can just take them apart and clean the jets and bowl reel good and they are good to go . If you have slick...
I found the best price when I bought them for my CB750A was on ebay. However you can find the ones you are looking for at this distributor in Canada: ...
http://www.siriusconinc.com/carb/parts.asp ... ____________________________________________________________________________________ Be a better Globetrotter....
can these go bad ? ( What are the symptoms ?? ) And what would be a fair price for a used one ? Im still trying to pin point my engine noise :-( with the...
anyone ever have this happen? bought a 81/400/t for parts on my 81 matic,the guy said it ran awhile ago but hadnt been started in yrs. so i had to try it,and...
When you said "noticed oil spraying out the ends of the mufflers! also noticed the oil is really thin in the bike like water? so what ya guys think?" ...it...
hi ken and thanks alot for your info! the smoke smells like burnt oil,really bad! its just pouring out, fills a garage in seconds,where you cant even see ...
I can't really see how a torque converter could "go bad". I mean, there's not much to it, really; just two moving parts to speak of. If you describe the noise...
looking for a cheap pair of side covers,and front fender for a 81 400,doesnt matter color or model- a/c/t/e whatever,or even some rust just so their useable! ...
Thanks ! Ive asked about this before,....I did the cam chain adjust,.. counter balancer adjust also. When its cold, the moter is pretty quiet When it warms up...
... Jeez, Dave. From your description, "clatter, clatter,....ya know how a diesel engine sounds when its idling..." - and - " When its cold, the moter is...
-- Hi again,..I did just change the oil ( 10-40 ) last year I did try 20-50, it did quiet it down a bit, but the bike seemed real sluggish on acceleration in...
Dave said: "...as far as the cam chain adjustment, how can I tell if its REALLY adjusting when I loosen the nut ??? I know if ya back it out too much, itll...
what do you think of this idea ??? I asked about the noise on another cycle group..... "It was a common thing when the carbs were slightly off that they ...
re. "It was a common thing when the carbs were slightly off that they would still run good but at idle was just a little rough causing the primary gears or...
Hi I have the Chilltons Honda Hawk 1978-1980 book Well, the guy at the salvage yard didnt say he was a 'pro', he just said he would listen to it and give me...
well, I rode down there this morning, and Keith took a listen and took it out for a ride too,....he thought it ran pretty well ,..he did hear that noise ,...
This doesnt happen every time, but I went for a ride today , got home and left the bike running ,..as I dismounted, looked back and smoke was commin' out da...
I thought Id give the balancer chain adjustment one more try,..it was a bit loose, I had the dreaded cant get the gears/splines linded up , and droping the T...
"highvoltagedave" <dfb25@...> wrote: " I thought Id give the balancer chain adjustment one more try,..it was a bit loose, I had the dreaded cant get the...
yea, Ill keep workin on it,.....I was pretty PO ! , and had to vent there was a couple 400 A at a salvage yard close to here, Ill have to buy or make a...
- Well, i gots my new T converter, many times, I got it on far enough , so when I put the cover on ,..it would be within maybe 1/8" - 3/16" of seating,... so...
never had this broblem before i repalced the T Converter,..I got it good and hot,..it idles ok,..but when ya put it in gear,..the rpms slowly drop,..then it...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
