I am looking for someone real. Serious only! If you are interested, plz add me
here:
http://sryhjsfr.zoomshare.com/files/addme.htm

Those senders are very difficult to find new or NOS. You may be able to have
yours repaired, here's one possible source http://www.clockdocgaugeworx.com/  In
the future, if you need any GM NOS or genuine ACDELCO replacement parts let me
know and I can run a free nationwide parts search and see what I can find. Clyde

dwinbolt <dwinbolt@...> wrote:          Recently bought a 1977 Buick
Skyhawk hatchback and although I need
numerous parts, what I need most at the moment is a good fuel gauge
sending unit, it mounts in the gas tank to the fuel pump bracket. I
have 2 of them, but neither one seems to spec out correctly. I have a
request into the local Chevy dealer as I believe that the Monza part is
the same, also Pontiac Sunbird hatchback and Oldsmobile Starfire
hatchback. Don't have a GM part number yet, but I will post it when I
get it. NAPA showed the part for 1979 and later Skyhawk, but nothing
previous, and nothing for Monza. Carquest couldn't help at all. My
Skyhawk has a space saver spare, that may be relevant in terms of
size/shape of gas tank, not sure. Most parts are interchable from 1975
to 1980 on the "H" body hatchbacks. Any way if you think you can help,
e-mail me, we will talk and exchange images. dwinbolt@...






---------------------------------
Get the free Yahoo! toolbar and rest assured with the added security of spyware
protection.

[Non-text portions of this message have been removed]

Recently bought a 1977 Buick Skyhawk hatchback and although I need
numerous parts, what I need most at the moment is a good fuel gauge
sending unit, it mounts in the gas tank to the fuel pump bracket. I
have 2 of them, but neither one seems to spec out correctly. I have a
request into the local Chevy dealer as I believe that the Monza part is
the same, also Pontiac Sunbird hatchback and Oldsmobile Starfire
hatchback. Don't have a GM part number yet, but I will post it when I
get it. NAPA  showed the part for 1979 and later Skyhawk, but nothing
previous, and nothing for Monza. Carquest couldn't help at all. My
Skyhawk has a space saver spare, that may be relevant in terms of
size/shape of gas tank, not sure. Most parts are interchable from 1975
to 1980 on the "H" body hatchbacks. Any way if you think you can help,
e-mail me, we will talk and exchange images. dwinbolt@...

Bob,   check out  the Forums section of  h-body.org. A bunch of us have
moved over there .  No spammers , no advertising pop-ups  and  a great
search  / archive function.



http://h-body.org/



- Greg

________________________________

From: hboamonzamirageclub@yahoogroups.com
[mailto:hboamonzamirageclub@yahoogroups.com] On Behalf Of Bob Fisher
Sent: Tuesday, April 10, 2007 11:40 AM
To: hboamonzamirageclub@yahoogroups.com
Subject: [HBOA Monza Mirage Club] Damn Spam!!!



If the spammers that snuck in this group keep it up....I'm leaving! You
clowns ruin it for everybody! I'd like to wring your geek necks!





[Non-text portions of this message have been removed]

Im in the process of selling a 76 Monza Mirage. Complete car except
for motor- tranny.Every-thing is there,down to the original
rims.Flares -spoiler Even the original paint job. NONE of the glass is
broke.This can only be a parts car,No TITLE I want a club member to
get this car.Someone who can put the parts to GOOD use.If anybody is
interested in this car please e-mail me soon.

My 78 spider (with out decals) was stolen last night (7-18-2006) from
my driveway. Any help would be appreciated. The licence plate is
Washington plate # 792 KZF. Pictures can be seen at the link at the
bottom, since the pictures were taken 6" fiberglass cowl induction
hood was installed.

It has a 327, Trick Flow aluminum heads, Edlbrock air gap intake,
aluminum radiator, aluminum water pump, Demon carb, 4spd, 5 lug rear
axles, 4 lug front, 15" Center Lines (3.5" wide front 8" wide rear),
battery in the back, MSD ignition one of Karl's Mirage front air dams,
factory sliding sunroof, rear spoiler, Auto Meter tach, Hurst shifter,
line lock, factory gauges, Hooker 2129 headers, Flowmast mufflers. The
car is black on black.

email msmith1.wa @netzero.net
phone 253-579-2255

pg.photos.yahoo.com/ph/ms.../my_photos

i have a set of v8 motor mounts for sale if i cant sell them here i
will post them on ebay alter this week. if interested email me or call
641-485-6776 thanks .....jason

If you are in the need for a dash plaque for your Mirage, contact me
right away as I am about to place an order for another batch.  The
cost will be $32, shipped to your door ready to install on your
console or dash.

Email me if you have any questions about the plaque and for paytment
instructions.

Doyle

http://www.quakercityraceway.com/
This is the 2nd year for this meet. Last year there were about 30 h-
bodies. Check out the H-body talk section at www.v8monza.com for more
info. Hope to see you there. Ron

I just wanted everybody to know that I saw an ad in Hemmings Motor News
about Monza parts (as well as Sunbirds, Starfires, Etc). He has whole cars and
lots of parts for sale. I am sending a Money Order for a licence plate light for
  a 1977 Monza Spyder. Here's his ad from Hemmings:

MONZAS: V8's, 2+2, nice bodies, other H-bodies, buy one, buy all, large
collection. Duane Hayes, Box 210, Peyton, CO 80831, Phone: 1-719-749-2852

Thought you guys might need something!!  Wayne (Clifton,  NJ)




[Non-text portions of this message have been removed]

Hello there,.. Iam selling my 1977 Monza Mirage here in Seattle
Washington.Iam selling it for 2 reasons, I dont have the garage to
store it anymore,and i need to acquire fast cash for a down payment on
a home.This Mirage is red white and blue(original paint).. has the
original front air dam, louvers,headers,a dual quad 350 with 450
economaster carbs and k&n velocity stacks,Has a new turbo 350
trans,accell,msd,unilite,real corvette valve covers,chrome
differential cover,chrome heater box,near mint black interior,the list
goes on...   It needs a good home,and i have to sell her fast!!  Clear
title.. needs very little,such as most likely a new starter
solenoid,vacuum needs to be hooked up for the power brakes...and
little things here and there..I have alot of cash invested throughout
the many years i have owned her.I hate to let her go, but i have
to.Iam also selling a jaguar,and a v8 s10,..if anyone is interested
please call me on my cell phone.My # is 206-999-8352.Best offer
takes..simple as that.Thanks for your time.Own a legend.Its a decent
project with hardly any rust.Garage kept all her life, Its a once in a
lifetime oppurtunity to own a REAL Mirage.MONEY TALKS!!! =)

Still trying to track down any Mirages out there.

Doyle


--- In hboamonzamirageclub@yahoogroups.com, nice77mirage
<no_reply@y...> wrote:
>
> I'm in the process of updating and creating a new, comprehensive
> list of all the current owners of Mirages. Please provide me with
> name, city, state, VIN number serial number, photos, and any other
> info you may have.
>
> If you have sold your car, please take the time to pass that info
> along so that the car might be tracked down. Any info as far as junk
> cars and old photos are also much appreciated since that will help
> determine which cars are no longer around.
>
> Doyle
> nice77mirage@y...

I'm in the process of updating and creating a new, comprehensive
list of all the current owners of Mirages. Please provide me with
name, city, state, VIN number serial number, photos, and any other
info you may have.

If you have sold your car, please take the time to pass that info
along so that the car might be tracked down. Any info as far as junk
cars and old photos are also much appreciated since that will help
determine which cars are no longer around.

Doyle
nice77mirage@...

I'm doing another run of Mirage serial number plaques. Read all
about it here: http://makeashorterlink.com/?T51B220AA

Doyle

Hey Group,
If you would be interested in an A-Pillar Gauge Pod for your H-Body,
there is a member at the V8 H-Body Talk message board that is trying
to put together a group buy.
Here is a link to the thread pertaining to this.
http://makeashorterlink.com/?S4F05281A
(Note, I used "Make a Shorter Link' because of the way Yahoo mangles
longer links).


Later,

Jon
http://www.geocities.com/jon72vega/my_page.html

I have a brand new "Altered By Michigan Automotive Techniques" decal
(it goes on to say some additional info) that goes on the drivers
door. It also has a blank spot where you can add the date to
correspond with your car. Very nice little detail item for a restored
Mirage. $10 with free shipping. cjbiagi@...
Clyde

Wrong price...

$295 + shipping for the 1st 10

$325 + shipping thereafter

Sorry for the confusion!

-Brady

Hey everybody,
I usually don't post here, but I do read the messages from time to
time. I have just started to reproduce the Mirage front airdam. It
consists of 3 pieces, the center section and 2 side pieces. It is a
high-quality 100% epoxy layup with multiple layers of top quality
woven cloth. Comes in a white (gel-coat like) epoxy surface coat.

These parts were pulled from the molds originally owned by Karl of
the now defunct MonzaMirageMania. They have been resurfaced and
cleaned up. They have the same shape as the ones Karl used to make,
but are 100% epoxy and at least 3X stronger and more impact
resistant.

Prices plus shipping are $275 for the 1st 10 people and $325
thereafter. Send me an e-mail to purchase. Better hurry!

-Brady
braidmeister at yahoo
GNSpyder on V8Monza.com

Just figured I'd join this group too, what the heck!

Later,

Adam

I'm having a small run of reproduction Mirage serial number plaques
made. I need to know immediately who wants one. I need a definite
commitment as soon as possible, today preferably. The cost for each
plaque will be $20 with a randomly assigned number, or for an
additional $10 I can have a specific ID number put on the plaque. I
know that Ron Lee is #2663, Rob Patton is #415 and I am #831. Does
anybody else care to have a specific number? Please pay immediately
using PayPal. My ID is doyle_coates@... I will pay for
shipping after the plaques arrive. Be sure and visit
www.monzamirage.com to make sure the number you choose for your car
isn't already taken. I'm only having 15 plaques made at this time,
so if you want one, please speak up.

Doyle

Hi all. A friend of mine put together a small website for me. It shows
before and after pics of my Mirage with the new stripes and has some
Mirage and imsa articles. Check it out.
http://www.geocities.com/miragestripes/

Thanks, Ron

I have a 1977 monza mirage I have owned it for three years I bought
it from a friend of mine will 55k miles it now has 61.
it has a v8 4 speed, and factory alloy rims, I pulled the engine and
trans out the first year and I thought the miles were bs, but I found
a clean engine with no real wear. the upper cam gear was in perfict
cond, there was still cross patch wear the cylinders honed after
the factory bore.so I put a double roller chain and gear,a low rpm
high torque cam and lifters, edlbrock performer intake,holley 600 cfm
carb,oil pump and a new exhaust system,the new systemis 3/8th of an
inch bigger than original, the old system fell apart when I tried
to wrench on it.the car it self has patches on the hood and top and
hatch were pant has chipped off. I would of had it painted but I have
decided to sell and I don't want to cover up the stripes. the way it
is right now you can see everything and no bondo.you can jack the car
up have three weels off the ground and still open and close
the doors, any body who knows gm unibody if there was cancer you
would not be able to do that. the car is pretty
quick. i am asking $2500.00 obo, but wil be willing to deal. thanks
kevin.

[Non-text portions of this message have been removed]

Check out this place for Auctions and Fixed price Sales (No
listing fee).

I personally liked the amazing : "AUTO-RELIST UNTIL SOLD" option.



  http://www.check-it-out-here.org



Fred

I have a 77 Monza Mirage for sale. Make me an offer. Divorce Sale!!

Has a target master 350, auto but does not run right now. Body is
sraight but needs a new paint job and some very minor work to prep
it. I live in Gilroy CA.

MUST SELL

I added a couple pics to my album. 2 of my Mirage with the new stripes
and 1 with the inventory sheet of the stripes.   Ron

> Question for anybody with the original stripes still on their car:
> What is the actual width of the white area between the red and blue
> stripes? Is the width consistent all the way? What about the width
> of the white on the side stripes? Thanks!!
>
> Many thanks go out to Ron for his tireless effort in seeing this
> difficult project through to the end. Hip,Hip,Hooray!
>
>
> Doyle



  The width of the white area is: 1/8" for the hood, hatch and top and
1/16" for the side stripes. Ron

I would like some more information about this kit. I haven't been
able to get to the groups for a while. Ron, if you get this message,
send me some details on the stripe kits. Thanks, Kent
doublemirage@...

The stripe kit that Ron Lee had made up arrived today!! It is beyond
my wildest dreams. All of the stripes are labeled with the factory
part numbers and even includes a color print-out to show where each
stripe goes. The kit even included the little red arrows for the gas
cap, the big black rectangle that covers up the rear fascia around
the lock cover, all the "monza mirage" text decals and the black
decals for the trailing edges of the flairs. A very complete
package!! I won't have to buy anything from Osborn Reproductions
except for the "Altered By" sticker for the inside edge of the door.
The kit even went to far as to include the "unleaded fuel only"
sticker.

Anybody that didn't get in on this opportunity on the ground floor I
highly recommend going ahead and buying the set. It's truly
something I've been waiting for and was well worth the wait.

Now, to get my car painted. If this didn't light a fire under my
arse, nothing will...lol

Question for anybody with the original stripes still on their car:
What is the actual width of the white area between the red and blue
stripes? Is the width consistent all the way? What about the width
of the white on the side stripes? Thanks!!

Many thanks go out to Ron for his tireless effort in seeing this
difficult project through to the end. Hip,Hip,Hooray!


Doyle

Mirage lovers, please read the post I have over on V8 h-body talk:

  http://makeashorterlink.com/?S2D8123E5

Doyle