Thanks all. The stock flasher seems to be the issue. I'm off to the parts store for a solid state one. Â ________________________________ From: Michael Jordan...
I had a guy on another forum ask me about valve adjustments on the G. Mine just turned 20,000 miles and runs great, what has your experience been in 100,000...
In a message dated 11/20/2009 6:30:12 P.M. Central Standard Time, marvinsc@... writes: I had a guy on another forum ask me about valve adjustments on the...
Valve adjusting on the G is quite conventionnal, and doesn't take too much time. The only embarassing thing is re-screwing the cover nuts, use torque wrench...
My mechanic says just buying new rubbers and they slip right on. I wrestled with mine for 5 hours and soaking them in boiling hot water worked. Lee On Nov 21,...
When i asked the owner how it handles: Lee No I dont. It handles very well, corners very well. I have been over 120 mph with it and I am extremely surprised...
Your mechanic is a liar or he has a good trick! I bought new ones for my red G, and I spent 3 hours...THE GOOD TRICK is what I would like to learn, as I always...
I don't do that by myself, because you have to use special tool. I do have the tool for 6mm (6x100) screws (engine covers for example) because its usual and...
Valve adjustment is relatively easy and cheap (usually free). The valves change the most early on, then just need slight adjustments after about 30-40K miles. ...
I wonder how far it leans compared to a normal G (or bike) and what is the potential for a high side dismount at the limits (I don't ride there anymore!) Looks...
... So far, I've had to heli coil one of my cam bearing caps; I expect to have to do more, if I remove my valve cover enough times. If you can drill and tap a...
... A good torque wrench is the cheapest tool that you can buy, and you need 2 - one 1/2" drive to handle the big stuff and one 3/8" drive for the small stuff....
... Why? He/she's got to make a living, too - and there are some jobs that I don't have the proper tools for. Support your local bike shop (assuming that they...
Sam, I adjusted my valves last winter because they were making some noise. The previous owner had done a adjustment and didn't do it correctly. Some were...
Just nailed another of those sorry PIA creatures, a 4 point buck outside of Mercersburg, PA. I was on my old Madura this time and managed to keep the bike...