Hi Dragman I'm in need of one of the rears discussed here,with all the brackets for a 76 vega 'IE: torque arm,etc ,length to be determined..So I'm curious to...
Hello Stephen,The Vega may be different than the Monza,I can supply a narrowed 9" Ford to match exact width of the Vega,brackets I have are for Monza,I believe...
Hi Dragman Also really need the torque arm bracket which should be the same on the rear end since they're the same rear???... And I'll try to get the answer...
Hello Stephen,I can supply a torque arm bracket,this is a fabricated bracket,the brackets I have are for a Monza,if you could e-mail a pic of the undercarriage...
NYMONZA, I have a clutch pedal and rod but I don't have the assembly, and I also have an extra Master Cylinder in my parts box that you are welcome to if...
Thank you, I could still use the clutch parts. I am going to get a new master cylinder. Shipping to Dundee NY,14837.My son will appreciate your help.Jeremy ......
Hi Dragman 76 and 77 vegas had only lower control arms ,a panhard rod and the torque arm setup,as do the 75 monza and up,just unsure same dimensions on both ...
Hello Stephen,If there could be a way to send a pic of your undercarriage, I would know if they are the same and could proceed from there if you are...
I will be there in my swanky 71 Kammback now replete with "power steering". Looking forward to seeing all the cars and people up there. It is always a good...
... Monza 7.5" Rear End. ... HEY TIM, Actually that is untrue as the s10 axles fit directly into the Monza 7.5 and the S10 brakes will bolt right up so the...
Hey "who ever you are" (a name would be appropriate) Actually the S-10 axles are about 1/16" of an inch shorter than a stock Cosworth Vega / Vega / Monza 7.5"...
... stock Cosworth Vega / Vega / Monza 7.5" rear axles - haven't you noticed that there is a little interference with the brake backing plate and the drum...
Hi How can you use s10 backing plates???? my 75 cos vega torque arm rear has a 4 bolt flange... not the tall flange plate of an s10 with 2 bolt holes and the...
Vega73 (a real name would be better) You use the backing plates off a 76 up Vega / Monza with the 9 x 2 inch brakes (same size as the S-10) along with changing...
Does anyone know of a source of a seal that will work for the rear hatchback of a Sunbird Thanks Jeff Becker 79 Pontiac Formula Sunbird [Non-text portions of...
About a week ago someone on here stated that the days of finding a nice clean monza for 1,500 dollars were a thing of the past. Well, today on ebay there is...
... JEFF YOU CAN GET THE SEALS FORM DAVE UP AT DAVES VEGAS VILLAGE THAT'S WHERE I GOT ALL THE RUBBER SEALS FOR MY 76 VEGA GT HATCHBACK I DON'T RECALL WHAT I...
HI ALL VEGA FANS I'M IN THE PROCESS OF BUYING 2 72 VEGA GT HATCHBACKS ONE TO REDO AND ONE FOR PARTS I'M PLANING ON PUTTING IN A 350 STROKER IN THE ONE I'M...
Travis , sounds like you got your work cut out for you . I just sold my 74 wagon but I drove it for 3 yrs with the 6.5 rear in it with the stock 13 inch tires...
... BACK TO ORINGAL FORM BUT IT WILL HAVE A WHOLE DIFFRENT ADDITTUDE UNDER THE HOOD I PLAN ON RUNNING THE STOCK 13 INCH VEGA WHEELS AND TIRES PLAN ON PUTTING A...
The hatchback seals are not made by softseal anymore if they made them. I am not sure of the diference between Vega and the Sunbird. I hatchback seal is off...
... cyl ... Well I have a friend who heli arcs a filler into the center that makes it mate right. BUT I prefer to use the whole rear axle fron 2wd S10 and do...
Seals are available from _http://www.1aauto.com/1A/Weatherstrip/Chevrolet/Vega_ (http://www.1aauto.com/1A/Weatherstrip/Chevrolet/Vega) [Non-text portions of...
The stock Vega rear end just wont hold up long under the torque of a V8. I owned one of these combinations several years ago, a 327 with the stock rear end...
I am restoring my '73 hatchback. I am in need of the following parts. I will also consider a parts car. I am located in Toronto Canada and I would preferably...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
