so these are big block chevy headers? ... the oil pan is for a small block. the headers were suppose to be for a small block but they sent the wrong ones....
I have a 1973 vega with the S-10 brake conversion all the way around. Most of the brake parts are new or rebuilt. I have a power bleeder and the system is air...
... around. Most of the brake ... air free but I still have a spongy pedal and this is a manual brakes not power. I can cut off the rear brakes and the ... ...
Can anyone help me to find the correct ball joints for a 1980 sunbird with 5 lug s-10 front spindles, or the "spacers" referred to on the swap blog? Bob Gunn??...
just go to v8monza.com and you will find complete instuctions and order form link to get the spacers that let you use your stock ball joints. Did mine this...
the headers are a for a big chevy they are hooker super comps #2240. ... From: Nick Morris <proguy1598@...> Subject: Re: [GM HBODY] still have a few vega...
For vega sunbirds and monzas you keep the stock ball joints and spindles. Jegs high preformance sells rotors that bolt right on for a 5 lug. The company name...
if you use gumm's spacers you just use the factory h-body ball joints,if you have youre existing control arms converted to s-10 specs,you have to use the s-10...
Hi Ron Do you know if any mods are needed for using s-10 v8 pan? Can you use shorty headers? Thanks Chris ... From: mrmustang312 <mrmustang312@...> ...
if you are building a drag car then this is the way to go but if you are doing a daily driver / street car then use the S10 brakes as they will last longer and...
All you need are lower ball joints from a 75 or newer Vega, _____ From: gmhbody5@yahoogroups.com [mailto:gmhbody5@yahoogroups.com] On Behalf Of dalacheax1 ...
By the time you buy the spindles for a S10, the rotors and the brake system. It would be just as much than buying Aero Space Components Rotors. You could use...
Hey Chris, Yes you can use the S10 oil pan swap for a Vega. There are no modifications needed if you raise the motor mount kit up an inch. It will work with...
Jim Fouldenauer from Council Bluffs Iowa drives a 77 Monza 2t2 (photos on V8monza.com) Running a block block with automatic. He is a regular at the midamerica...
Hello first time poster,I bought a 71 ega panel and the brakes ddon't have a power booster just a little doda thinging,Just wonder where or what i should use...
Hello all, I have a general question and I am wondering if anoyone out there has "real life" experience on this subject.. recently I purchased a BEAUTIFUL,...
http://h-body.org/library/hbodyfaq/index.html Check out section 3.11. All the numbers, etc. I believe there is a speed merchant who sells these parts as a...
I ordered a set from E.B Atmusback in Oct. 2006 ,spoke to Cathy...413- 739-4551,part #'s are cone bearing 16143 ,cup # 16283,Timken bearings,came to $ 52.00...
hi, like to know the condition and price. thank-you. (was it retreived from a v8 monza?) ... From: monza408l <monza408l@...> Subject: [GM HBODY] FS: posi...
Posi unit is a Moroso unit,it is in good shape,has a small nick in housing from when the pinion gear snapped in half.Will not affect performance of unit. I am...
http://img122.imageshack.us/img122/2446/crlflyernh2.jpg come join us, or go to www.dfwcharityracing.com to read more. you dont have to register to see the jest...
