I have a 2-stroke Sport 2B model. _________________________________________________________________ Find and compare great deals on Broadband access at the MSN...
go to the photos section here (tech) and there are some good photos of what things look like when you take off the clutch/sprockets cover. ... Speed ... ...
Just curious if anyone knows what the NGK replacement would be for the stock plug in my scoot. The scoot is a 2003 Qingqi QM50QT-H (Retro). The stock plug is...
Is your QingQi a 2 or 4 stroke? If 2 stroke, try www.scootusa.com for parts! The owner there is extremely knowledgable and has over 30 year experience with 2...
Mine is a 2 stroke - but I believe it is the same as your TS50QT-8 just with different body panels (retro). Just curious, how is the performance of your scoot...
My scoot performs about as well as yours. I actually bought two identical QingQi's.....one for me and one for my fiance. Hers has better take off than mine...
I have checked out www.scootusa.com and the plug that he sells shows a 353 marked on it so I am assuming it is an Autolite 353 which cross references with a...
Yes, the 353 is definitely an Autolite 353 (incidently I got a few from scootusa.com). I've had mine WOT for 2 plus miles and don't have any problems with it...
Well, I just checked my tranny and it doesn't have an overflow hole. Just a large fill hole on the top with the rubber plug and a drain hole on the bottom. ......
Double check your tranny - it should have an overflow screw that needs to be removed to make sure you don't overfill it. Check this site for pics and more...
I will double check the tranny for that rascal! You've helped me tons! I didn't even know that that bolt was the overfill! I have probably about 550mL of...
Well, I removed the overfill bolt and the oil level was right on the money. I think that maybe 20 drops of oil came out (with the scooter parked on the center...
I've sprayed starter fluid up the snorkel then quickly kick-started it on the third try. I would guess that revving it with that stuff in it isn't a good idea,...
... I ... do ... Might want to check that you're getting enough air into that carb. Your filter could be clogged, or just that very bad bend in the pipe is too...
Well, I'm back after a few months since my last post... All I have to say is ANYONE thinking about buying a Geely... The FX-16 is the $hit... I have over 1000...
Well, I'm back after a few months since my last post... All I have to say is ANYONE thinking about buying a Geely... The FX-16 is the $hit... I have over 1000...
Mr. Abercrombie, I just ordered a Retro Turbo. What's the difference between that and an FX-16? I have a NP50T-M that rocks, too. It easily goes to 50 and I...
I had much of it apart just the other day and couldn't believe this thing breathes on an intake that is probably about 1" wide by 1/2" tall at most. Has...
The FX-16 uses the Yamaha Jog based motor with a belt driven CVT tranny. The Retro uses a Yamaha Vino based motor but it uses a single speed chain driven...
Some of the new Retro Turbos do use a CVT Belt drive tranny - double check what you've ordered - if it's a single speed chain drive you are far more limited...
Thanks for the insight. The Retro Turbo that I'm getting uses a CVT I'm happy to say. There is also supposed to be a difference between the Retro carb and...
Well, at least that's something. My goal is to have a long lasting engine, not necessarily more powerful. Thanks, Bill Longyard ... From: pmanessis To:...
Sorry for the blank first post. Hit a wrong key. Can anyone tell me what the brake horsepower of the standard Retro is? In Pennsylvania the registration is...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
