Has anyone done anything to a Sport 2b to make it faster...what is the fastest a sport 2b has gone. I had a local motorcyle shop look at my sport 2b and they...
I have a sport 2b and after 200 miles it hasn't gone above 31mph. Make sure you don't have too much oil in the crank case (this took me from 27mph to 31mph),...
grinding out my exhaust took me from 28mph. to 32mph and thats with my gf, her bookbag full of junk, trunk full of tools and myself.. i have yet to test it...
I want to know how you grind something out if its not there? I post some pictures of exhaust removed from JL50QT-2B - there is nothing that can be removed....
The material that can be removed is not any extra washer it is simply extra welding material. It can vary from one scooter to the next. My exhaust pipe had...
same here.. not as much as the one here but still enuff to cause something.. whats talked about with the grinding is the weld that holds the pipe to the...
Can anyone tell me how to find the right setting on the carb for the fuel/oil mix on a 49cc 2-stroke engine? I've been turning the screw counter-clockwise...
You need to adjust the mix screw first then the idle screw. You have to find the position for the mix screw where the engine runs the fastest, that is it slows...
Thanks G.G. Well, I'm like you in that I couldn't find that sweet spot. I did notice on an old plug that it looked like it was running a bit rich. The bottom...
Vito, When I have gone more than a few days (sometimes even weeks and months) without starting my JL50QT-21, I'll let out a little excess fuel/oil mix out of...
I agree with Brian. I don't actually have a Geely, I have two QingQi's and one will start up every time and the other needs some coaxing every now and then. ...
Great...I will try it..I have never removed any covers and I am not familiar with the carb....any help on locating it/. Thanks for all the help. ... From: Karl...
Vito, If you're hesitant to mess with opening the carb, then do this.....take off the spark plug and try squirting a little carb/choke cleaner/starter fluid...
On the bottom of the carb, you can see it right on the carb without having to take anything off...it's very accessible. Good luck. -Brian on 2/9/04 8:45 AM,...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the geelyscooters group. File : /Free...
geelyscooters@yahoogr...
Feb 13, 2004 4:47 am
706
I took out the air intake restrictor today that was mentioned in this thread. I noticed that the scooter now starts a lot better, and there is a noticable...
Heya all ~ I have a 2003 Geely Euro 49.5cc (JL50QT-15) which I am selling. Approximate mileage is about 59km. Needed something with a little more power where...
I recently purchased a couple of these models, i have heard a lot of stories about the rear sprockets coming apart, has this happened to anyone, can you...
Ours broke the first time we rode our Eurosport. I replaced it and now have 400 Km on it and no problems with anything. I was told that there were a batch of...
I am thinking about purchasing retro, but after reading all these messages...I am a little hesitant. From what I have read, there seems to be MAJOR problems...
I live in the DFW area and I JUST registered two QingQi's today! Make sure that when you get your scooter, if it's not titled already, that the person you're...
I live in the DFW area and I JUST registered two QingQi's today! Make sure that when you get your scooter, if it's not titled already, that the person you're...
thanks ron, i bought 2 of the 50cc two strokes, before i even put gas in them i found two hoses kinked, one plug gap was to big, one was to small, a few loose...
After 500km of smooth riding, I've had my first problem. Maybe someone can help. My scooter made a strange loud noise while riding (not backfire) and the...
I had the same problem when I first got my "Metro". It turned out that there was too much gear oil . Drain the gear oil in to a container. Replace the drain...
So I drained the oil from the crankcase as suggested and holy crap was there a lot of oil. I'd say I drained about 550ml of nasty looking oil from the thing. I...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
