plug check......check compression check......check how much is too much??? errrr smoke check..... allengrota <agrota@...> wrote: If it was getting that...
Why are the drinks always on me? Karl, you are the bartender, I think they should be on the house for a change. I don't have an impact wrench so I had a...
Lee, you're right, foo foo drinks for everyone, on the house! Guys if you're in the market for a cheap impact wrench, I got one from Harbor Freight Tools...
I conclude IMO if it runs right in the summer it will run right in the winter.... If you garage it in above 55 degree temp then it will start right away.... I...
I bought the same one, though I have access to a bosche 115v, and I like the 20 dollar one better. It's funny about the way it works.....I thought it was...
I came out here to get away from the 20 years of NY winter! I know what -40 and colder wind chills are like! my body has adapted to the warm weather........
Fruits sitting there? Sometimes I worry 'bout you island guys. I think it's six 5 gram weights and I think they were 8 grams to begin with. I'm just going...
last year the oil drain plug threads striped out and i put in a hilocoil. i changed the oil lastnight, put the drain plug back till tight and gave it 1/4 turn,...
try welding it first before buying a new case maybe...... chrlduck <chrlduck@...> wrote: last year the oil drain plug threads striped out and i put in a ...
I have no knowledge of what he is talking about, oh wait...fresh mangoes.....healthy foo foo drinks-yeahhhhhhhhh I'll trade...come over between 5-6pm or call...
i think its cast aluminum. last time i tryed to weld cast aluminum i destroyed it worce so i was trying to avoid that.. plus having to take it all apart ... ...
There are many weird words out here, almost every word back on the mainland has a word out here so dont feel bad if you don't understand :) lots of work for me...
I almost bought that one! I decided it might not have the power. I ended up buying the 110 volt, $69 (on sale for $39) at harbor freight. Looks like I could of...
I have 2 X-1s and 2 18s...One X-1 has 5.5 gram weights in it, one X-1 has 5 gram weights in it, they both perform about the same, although the 5 gram one revs...
It's probably safe to say that my engine will have the same weights as the X1, since they are the exact same drive train (minus my jap walbro carb). I will...
Brian, If you use the 16X13's....I have the variety pack left over still with plenty of weights left to figure out what is good for you. My 16 used the jog50...
aloha everybody! with the help from james my scoot has lowered weights by 3g total ! I took it out for a test run, and off the line speed has increased! I can...
The tube going to the air cleaner just hangs there it is the air intake. Just make sure nothing is blocking it. There is also another one that does not conect...
Thanks for the response John! You mention another tube that doesn't go anywhere. Is this the tube I have in question, the one that enters the case on the far...
Guys, can you mix roller weight weights? Am I understanding that right? You're mixing 5 and 7 gram weights? Do you position like weights across from each...
The other one just hangs too. It appears to be a vent for the variator housing. I think the tube is there to prevent foreign objects and/or water from getting...
I would use JB weld as Karl suggests. I've used it successfully to repair a rather large gouge on an engine block cylinder deck that was causing a head gasket...
One tube IS the air cleaner, the other one is a breather for the cvt. Both just lay in towards the engine. Even though they may have clamps on them, they...
Seems to me that you would want all the weights the same so they travel at the same rate to change the ratio. ... right? ... across ... board and ... line ... ...
the variator utilizes 3 pairs of weights..in a triangular pattern....each pair needs to be the same as the others. if you use a 5 and a 7....the two other...
Yes...maybe, yes, maybe... take a look at the attached pic...3 pairs.....A+B makes a pair...make sure you keep it in order...and keep the most exposed metal...
James, I just dropped the weights another 3g, I took out the three 5's and put in three 4's. It seemed to be slower than it was before. accelleration was...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
