Go to Files, Maintenace Issues, FX16 schematic. It should be close. For manuals heres a compliation that should be of use- http://tinyurl.com/2rqcw2 ...
You rock! Those are fantastic. Thank you so much. This will help tremendously. I just have to figure out which model is mine, and follow the circuit...
Thank you, Larry! You guys have been awesome, and I so appreciate your guidance and encouragement. It just so happens, I was able to purchase this for that...
Kat - I agree with everyone else here. My '02 JL50QT-21 has required a lot of tinkering and learning. It's taken almost a year but at 73mpg, everything...
For the circuit use the FX16 schematic on this site. The circuit should be a match but the wire colors may be off at times. Since both the front and rear...
~E thank you so much for your encouragement. I think I have a lot of learning ahead, and much to tinker with, but I, too, feel it will be worth it. she's...
That's a nice and clear schematic. Seems to match all the colors we've come across so far. thanks again ~ Kat ________________________________ From:...
You're welcome. Here are a couple of other manuals for bikes very similar to yours- http://tinyurl.com/mn7hbu http://tinyurl.com/nfpo2l Note that the last one...
Well I finally torn down my manco Hornet scooter that died and wouldn't start Let me go over what happend and what I had already done, It died as I was sitting...
As to your spark plug. You said it was good. Did you actually check to see if it sparked? I know, kinda dumb question, however, I had I had a plug get a...
yes changed the spark plug 3 times Paul ... From: Larry Thacker To: geelyscooters@yahoogroups.com Sent: Wednesday, July 08, 2009 2:50 AM Subject: Re:...
and remember the bike died at the stop light like it ran out of gas Paul ... From: Larry Thacker To: geelyscooters@yahoogroups.com Sent: Wednesday, July 08,...
Weak compression could be a sign of bad valves or bad valve timing. You need to do a compression test to see what is going on. At least take the valve cover...
well it now has a new head valves piston rings cylander and cam, I odnt'have a compression tester to actually see what the compression is Paul ... From: Allen...
Actually, it's probably not 180 out, it's probably off by a couple of teeth. Usually at 180 out, you will have compression and it will backfire. ... -- Allen...
whenI removed old piston I set it at TDC and cam ha 3 holes one large it was facing up and 2 smaller ones were aligned with head edge and that's how I replaced...
lol ummm yea I jsut tired to start it after having he battery on charge it jsut sounds like it's turning not even TRYING to fire at all, i've got a stupid...
Yes, but you said you had spark. You have to go back to basics. You need to find out if you have compression. It could be that the valves aren't set right....
I have a JL50QT-21 that I bought from a previous owner and the reason he got rid of it was the clutch slipping. I checked the owners manual and it recomended...
The clutch drive should never be submerged in oil. Just enough to lube the chain, sproket, guide/tensioner and clutch drive. There are 2 advantages to using...
10# is the equivalant of 75 weight here. It is a foriegn designation. That said, many people do have better luck with straight 30 weight...and as Lew ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
