When I was cleaning the carb on my 2 stroke, I noticed very little fuel coming from the fuel cock and I blew it out and a pice of rubber like material came...
Your description leaves me in a fog. Were you sucking on the vacuum hose to the valve while checking the flow of the fuel valve? If not, the flow should have...
There was no gas in the line after the fuel cock on the outside so I blew simply with my mouth on the fuel inlet and a small piece of blackish green rubber...
your not going to get a lot more speed out of the bike, you can now play with the clutch springs, and variator weights, and fine tune them and maybe a...
My neighbor put the 80 or 90 cc kit in his. The only diference is he doesn't have the lag time after acceleration to top speed. His pulls right up tyo top...
You are correct. Changing from a 50 to a 80 cc will not increase speed, but it does increase power to get to the max speed the scooter was able to go. Mine did...
Bigger jets will help a little but you are limited by the small wheels. How fast do you want to go? Like Paul said...you might need a bigger bike. ... -- ...
I am still not clear about the fuel valve and your reference to the screw in the hose above the fuel inlet. So, a few questions about the fuel valve. How many...
I tried 10g weights in my scooter and I LOST speed I went way down in speed from 40 or if I was lucky 30mph so I went back to the 8g weights, whenI get some...
OK I think what is happening is that the line that has the screw is the vacuum line they left it direct, also that is the reason the fuel is coming out because...
I have a fiji 150cc that has a max speed of 53mph and crusies about 45 I was wondering about any easy fixes to get the cruise speed up another 10mph Michael...
Any idea where I can get a new fuel cock? There are four attachments on this one I attached a diagram. I don't know where the one with the screw should go...
I have the same scooter, and I go about 60-65 with no problem. So, I don't know what to tell you, but I will ask my mechanic. Jeff ... From: alienm61...
Cant get a spark, and not sure where to find the right coil. Its got the plug wire, and one white wire with a connector coming out of it, and two chines...
I sounds to me like a previous owner had a leaking petcock diaphragm and so just used the vacuum hose side for the fuel line and blocked off the old fuel line...
lol the 10g weights were given to me so I tried them right now the factory weights are 8g I was thining about getting 2g weights and replaceing 3 of the 8g...
A suggestion, before you spend the money, remove three of your ten gram weights and try that out. If it works for you at that setting, change over to a set of...
you didn't read my post that well I did not say I woudl be running with 3 , 10g weights I said I was going to keep the 8 gram weights that are in the bike...
I suggest you slow down a little as you re-read my post so your reading comprehension catches up with your eye tracking speed. I will endeavor to do the same...
Many times, just going back to basics will help. Make sure the tires are aired up and the wheels spin freely. Your weight, terrain, and jetting will affect...
o.k. allen this bike isn't a 72cc bike it's still a 50cc I hadn't upgraded this one yet Paul ... From: Allen Grota To: geelyscooters@yahoogroups.com Sent:...
Don't trust the speedos. Use GPS to see what you are really going. They tend to read about 10mph or so too fast. ... I don't know what to tell you, but I will...
Greetings all... I have a '07 Tank Urban Classic TK150T-12 (The same scooter as Roketa MC16-150 Capri, BMS (Boreem) Heriteze 150, SunL SL-150T-6E, Baron 150-R,...
well.... it is fixed.. fyi -- My FLAPS (friendly local auto parts store) carries not only the bulb (#194) but the socket that the bulb fits into. (#85816...
Greetings. 1. Can someone tell me what the standard CDI for a Tank TK150T-12 (Tank Urban Classic TK157QMJ) revs to?? 7000, 8000, 9000, 10,000, 11,000 ??? 2. Is...