the rest of you probally would not find this a problem(unless of course your married or at least living with somebody) but I have a problem lately, I keep...
actually this one would be good for doing quick fix to and selling. all it needs is a bit of body work, quicky coat of paint, and maybe a transfer case(ya have...
after noticing bumping sounds under the front end when turning the wheels while sitting still,i crawled under the Wag to find that the axle was shifting left ...
It's not normal at all, but fairly easy to fix. What you need to do is tighten the bolts that hold the u-bolts on. Torque em down good, and the problem should ...
Another easy poll, please take the time. Feel free to pass this on to any other e-mail lists or clubs where you think it will help our cause.<br> <br><br>Read...
Alright I'll try and make this as clear as possible. I noticed when cold my 78' Cherokee is kind of hard to steer when wheel is turned 5-6" left to right once...
well actualy what i meant , was that the springs were moving in the spring pearch/shackle area...there is a bushing there and it looks chewed-up,....where can...
I'll say. Maybe a Y2K error in the on-board computers caused all the FSJ's to run trouble free. Something like that must have happened because ever since I ...
Well, after thinking long and hard about it, I've decided to pull the 360 and get rid of it. I'm tired of how hot that damn thing runs under the hood and how ...
Way to go Snakeyes! A man after my own heart. <VBG> Just something about GM powered Jeeps that I've always liked. I must admit, I was saddened when...
speaking of engine swaps. I am able to get my hands on a carbvarated caddilac 4.1 litre V8. the car it comes out of is front wheel drive but the engine sits...
Sorry I haven't replied sooner, my Chero (79), doesn't have any bends at all in the tie rod. It also sits level, or maybe even a little higher in the front....
Thanks Lindel, I've posted this same question on the BIG FSJ site twice before and it seems to be a stumper! Can you tell me where is the end of the pitman arm...
Just went out to look at mine for a comparison, and the pitman arm is slightly above (about 1 inch), and has a slight drop in it (about 1/2" in the pitman arm...
I appreciate you lookin for me. I'm now pretty much covinced that my springs need to be replaced! Which means a suspension lift (if I can get it past my banker...
ok im going to attempt to create some conversation. I want peoples thoughts on the NP208 transfer case. I would like to know what tranny's will bolt up to it,...
The NP208 is a pretty good chain-driven t-case. In the Jeep version, it will mate to any of the transmissions Jeep has used since 1980 that have 23 spline ...
Just wanted to get ya'lls opinion on suspension lifts for a 78' Cherokee. All I want is 3" 4" tops and I'd like to get it with softer springs than stock. Also...
so if for some strange reason I actually want to put an automatic in if I ever put my 304 into my truck what automatic would be best that mates to the NP208...
The 727 from any 80-up SJ Jeep would be the best automatic you can get and it shouldn't cost a lot, since these are the normal auto found behind the 80-up V8 ...
Cool, thanks. now in my travels and reading different for sale add's I know what to get if I see it for a good price. im always looking for good deals on ...
3" or less shouldn't require anything out of the ordinary. The dropped pitman arm is only required for 4" and up. Only consideration would be the driveshafts, ...
Hey all - was cruising the Yahoo universe - very happy to have found a local Jeep club and you all..<br>Anyway - name's Jon & drive an '87 GW. Also own an '83 ...
Welcome to the group. Nice rig, is the grille off of a J-truck?<br><br>Can't really say we're local to anywhere, since some of us are in TX, and some in WA,...
Hi Lindell - I thought I 'recognized' you!<br>I'm also on IFSJA.. and the dissention that you refer too is how I came to find this list. All the rucus sent me...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
