John, Could you inform me about sizes etc from the windscreen you made. How thick is the material? How did you mount the screen? How does the wind flow? Does...
At the rally alot of people were asking whats up with EML. I thought maybe one of our members who live near by could give us a heads up. Thanks Dave...
Well gang I just got an update from Gerrit in the Netherlands. Gerrit has Hannes making some mounts for his Harley but unfortunately he is not well. Because...
I need a new lens like the one in the pic on the home page. Cracked mine. Armec wants $24.00 US for the 2 dollar lens. It looks like the same thing that...
The specs call for 1/4" in. Which car, H will you be using? Bags on the right? gary former flexit owner ... <image.tiff> ... <image.tiff> ... [Non-text...
Dave, I believe that lens you're looking for is a stock marker light. Try big truck stops. I found replacement lenses for my forty year old Wixom saddle bags...
Right now I have it approximately 1/4" and I used the gold wing H frame so that I could mount to the crash bar. I was able to maintain the right side bag with...
The front oem heim should be lower than the rear I believe. jdr1102 <derrick@...> wrote:Right now I have it approximately 1/4" and I used the gold wing...
Hi all, EML did have some problems but are still in business. Web address shown below. http://www.emlsidecar.com/ Regards Frank Sumner ... <no_reply@y...>...
... Good to hear you finally got it mounted. Putting a Flexit on any bike puts a lot of weight on the front leading to front end shake. The hot tip for the...
From Mssg 1590: 1: H- frame must be parallell to the bikeframe. 2: Centerline of MC to pivotpoint(D-cam and front ball joint) should be 230 mm. 3:The front...
I just added 4 pics in the photos in the folder Harley Mounts. I could only show these as the storage space is tight. I will find another place to post them...
Boy that's wide, you sure you can get it out the garage door. Oh constructive, Derrick I would tack the front mount (on the under side so you don't trash the...
Thanks Dave, I know its really wide, good thing I have it in our shop with 12 foot doors! I will add a pic in a second of the rear mount with the bag off so...
humor me, run a piece of angle iron from the bolt on the floor board back to outer lower bolt on your back bracket. Your guesset looks good and I think it...
You're nuts. Put it back on the Beemer. That front mount will twist on the bar as the back mount bends. If you got the owner's "manual" with the Flexit, it...
Bolt, thank you. Its a work in progress and I have to isolate the front mount. In other words I have to add a brace from the front mount back to the frame...
Derrick Far be it for me to cast nastertiums on other people's mental illnesses (I have plenty of my own) - but you're not thinking of putting anyone important...
Has anyone ever replaced a tire on the flexit and if so how difficult is it? Also has anyone considered replacing the standard Carlisle 4 or 6 ply 16.5 x 6.5...
Derrick Later models of Flexit were fitted with a 10-inch car wheel (Mini??) and car tyre. Mine has this - and Liz says that when we're cornering, she can see...
GREETINGS We want to take a minute to welcome all new members to our group. Please feel free to introduce yourself as we'd like to know who you are. We hope...
Derrick, glad you understood my gist. I don't think you're incapable or anything, I just know my own tendancy to want to get an unfinished project on the road...
I've put 3 on. First issue is to find a place that does enough golf carts and trailer tires in that size that they don't damage the rim (I haven't found that...
I've been listening to the traffic on this and just got around to looking at the pictures. Derrick, please don't ride this the way it is. The mounts are WAY...
Bolt, Currently the front heim is ahead of the crash bar by 2.25 inches as I have not cut the h frame down to suit my needs. The heim is in line with the...
Bolt, What kind of speeds do you run on them and what kind of mileage did you get? I am trying to look forward to some places that might have what I need or...
Al, Thank you, I have listened and I am currently fabricating a mount that will come off the frame, around the lower fairing and tie in at the front mount. I...
Announcing a contest for ISOK Sidecar Ron-De-Voo goers! Send in your guestimate now!! Guess the correct number of paid registrants at the ISOK 2004 Rally and...
