Dave This all sounds suspiciously like someone who's "Going Away"; I trust all is well in your world, that no-one has offended you, and that you haven't...
Hi Dave Good to hear! I seem to recall reading that Armecs are made for right-side fitment only, so wouldn't be allowed here. I took the pictures of the red ...
-I have an old test report in Motorcycle Sport magazine which lists Watsonian/Squire as the official importer as of about 1990. Then it moved to EZS in The...
Chris Watsonian will tell you that a Flexit is diabolical, dangerous and impossible to ride/mount/register/maintain, etc. The depth of their ignorance was...
Hi Steve, What you have written is somewhat unfair to Watsonian Squire. My Flexit was obtained through Squire at a time when they had a Triumph Trophy 1200 &...
-I'm not entirely sure about the details but I have heard from those who know Hannes that he has had some fairly significant health problems over the years....
Hi Franl Good to hear from you again; at the risk of incurring vitriol, when I was still Flexit-hunting, I contacted various importers in the hope of turning...
Sorry it would seem that there is no supply you could try Watsoian-Squire as they used to inport them Other wise the best bet is ring Flexit They are not very...
Well said Altthough I bought mine second hand privatly Watsoian-Squire have been very helpful perhaps they were just having an off day Steve Ian Hi Frank how s...
No nasty comments from me Steve, you have every right to comment as you see it. Just putting a slightly different perspective on the subject. Anyway, how's...
I'm hoping to do my first track day this year. Question is, should I try to do it with the Flexit, solo, or perhaps a few sessions with and a few without?...
Go for it ? what's track day? Dave who thinks everday is track day. When I get to old for sidecars I'm going to buy a sport bike w/ A turbo charger. ... with...
Hi Frank. Just felt like posting a couple of winter pic's so you will be prepared before you go. Plenty of snow all right! Have a look in the folder "Norwegian...
Hei, Jul hyggelig å se et bilde av vogna igjen, gikk det bra å montere den på sykkelen din?. Hvordan syns du det er å kjøre med den?. Om du noengang skal...
Jul Glad to see that you've got the rig hooked up to the Guzzi successfully - but what's all that white stuff on the ground? And why is it so dark? ...
Definitely both - but don't forget to remove the stop-plate from the Flexit's rear pivot-plate. I did one session at Phillip Island and was "on the stops" at...
--I did one a couple of years ago. It was great fun to explore the handling limits of my K100LT/Flexit rig but I found that by the second track session I was...
Steve, What's a stop plate? Mine goes as far as the H-frame's D-cams allow, and when I reassembled it last fall I lined it up for max lean both ways (it's...
Bolt Inside the D-plate on the bike's side, I've got a cresent of steel about 12mm thick, attached to the H-frame with two cap-head screws. It moves in an arc...
On the US made Flexits, the D-cam is thicker where the mounting bolts go thru top and bottom, and that's what the H-frame bangs against. I didn't check, but...
Hi Jul, Thanks for the pictures. We were very lucky to live in Stavanger for 3 years (back to England in 2002). We are going to Hovden (Hovdestoylen Hotels...
... I just had a look - if you go to Photo Album "Lefty" amd look at Pic "Main Linkage 2", it shows how the Stop-Plate could be retro fitted into a mounting...
... From: Carol Vetter To: sidecar Sent: Saturday, January 31, 2004 5:26 PM Subject: Re: Craig at Sidecar Rally Hello from Colorado. It's cold here too.... and...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
