I just bought a 90 Probe lx for a doner car. I have a 91 GL that I am looking to convert over to disk brakes. The doner car is missing the right rear calipers...
ok, heres the problem, when im driving my car, i hear a clicking from one of the relays, im assuming near the dash, most of the time, the tach willl drop all...
A supercharger is one way to go, but probably the most expensive, not to mention having to recalibrate the Probe ECU. Perhaps a better option would be to just...
That'll never happen. The Cologne V6 will not mate to any gearbox in a Probe. They are completely different than the Vulcans. They were made for RWD...
i've spent a lot of money on mine having a cam made crank redone so i could use pistons from a 350 3.11 dome top to get 250 [Non-text portions of this message...
Are you talking about the 4.0 V6? I am not aware of any 4.2 V6 in an Explorer. I know there was also the 3.8 which has the same mounting positions as the...
Well the 4.2L is a Canadian Essex V-6, which was used in pickup trucks, but I'm not entirely sure if it was ever used in Explorers. The Explorer's 4.0L was a...
Hi, group. Im in Atlanta, GA area, need a good short or long block 2.2l motor, for my 88 MX6 Turbo. I think normal motor will work, too. email me direct,...
Well I wasn't even going to reply to this because xxxflyboi69 is WAY OFF!!!!!!!!!!!!!!!! YOU CANNOT and I mean CANNOT just swap in anyother motor other than a...
Lets not get off track. We are not talking about swaps here, we are talking about 3.0 performance! ... OFF!!!!!!!!!!!!!!!! ... a 3.0 probe or 3.0 Taurus and...
It goes without saying that "simple" swaps just don't exist for a Probe. If you're a good gearhead and an electronics technician, you can adapt any V6 engine ...
Parting Out 1988 mx6 Turbo- or Still Looking for a 2.2 motor Well, couldnt make a deal with anyone on a motor- but if we havent talked yet and you have one,...
Hey there 1st Gen owners, I'm from Xtreme-Doors and we wanted to extend to you an offer. We have developed a direct bolt on application Lambo Door conversion...
That's awesome. Give me about 90 days and I'll have enough money saved up to get a set. Does anyone know where I can get a sleepy- eye mod for a 1st Gen ?? ...
I don't believe its something you buy.. what you can do is wire a switch into the relay for the headlights and control it.. or just turn on your lights.. pull ...
i've got an 89 gl 2.2 and the motor is blown in it and i was wondering if a 2.3 from a ford tempo (i belive) would bolt in or if i'd have to some mods to get...
As far as I know, the 2.3L is a Ford engine, and the 2.2L is a Mazda engine. They have different bellhousing patterns. Somebody correct me if I'm wrong, but...
I have never heard of this swap either. But i maybe wronge also. the 2.2L is used in Mazda cars also. Probably not worth the hassle to make it work. I would...
hey y'all i just picked up a 91lx 3.o with an auto trans. now this does stink badly so we want to put in a manual trans if anyone has done this swap and knows...
Yes, I know, this is a Performance group, not an engine swap group, but SOME people such as myself get more performance by stuffing a bigger engine into their...
Does anyone know where I can get a 1989 (GT) model front facis/bumber cover? It seems as if I had the last one on the planet when a tow truck driver backed...
You'll have to mimic the hole/opening in the body floor to allow the mtx shift gear to pass through it. The mtx should just bolt right up. A good thing to do...
Check Scooters, they always have bumper covers, I got front and rear for my Probe from them. They specialize in only Ford Probe parts. The address is:...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
