Ya, I changed the adder to 8c. I forgot to say that. I found a major leak in the rubber air intake hose so the maf was reading in correctly and I replaced it...
does anyone have one? Please email me or call me or something if you do! Thanx in advance also can you tune the e934 with e931 xdf/bin files? Thanx Jeremiah...
Hey, I have a 92 eclipse GS n/t with a 94 eb20 ecu and I get a egr code when cruising down the freeway sence the 92 does not have the egr position sencor....
Many of the local Colorado DSM guys that are using E-85 are finding injectors with black goo causing them to foul. They feel this is causing a cold start...
I was just down at Jack's shop and was asking about what all the hoopla was on this subject lately. All I know for sure is that I never ran more than about a...
Just read an articel on dsmtuners, the glue is some part of E85, thats what the analyse told them. but its not in all E85 fuels? anyway the bad starting...
... Carl, The symptoms I have are: At first starting it will not stay running after first firing unless the throttle is jabbed. Plus, after starting it...
7C37 is the stock e931 table location for "120s startup enrichment" (8byte) And the global enrichment table is located at 7C2F (enrichment or leaning all the...
I am unsure what I am doing wrong but here goes. I have tried using the maft with a bin I received from J-K-Tuning.com with conpensation in the bin for 750cc...
Why would you buy a chip for a DSM from a Honda tuner??? What did you expect for $50? Without reading the chip, we can't help you. The MAFT MAS compensation...
... The injector size compensation is probably off a bunch for some reason. Do you have an AFPR? If so, adjust your fuel pressure and see if you can get...
Im starting a .bin file for a friend that has 1G Auto trans stock 450cc injectors and a 14b. I just dont know where to find the settings for compensation,dead...
I am running 650's with 2g MAF on 1g car. I tried to edit a bin myself, looks that I am doing somehing wrong. I was wondering if there is someone with a...
Have you seen this page? http://www.ilostmymind.com/ECU/DSM/custom.html You can download a bone stock e931 bin for reference, too. Enjoy! Dave W. ... From:...
i have a question for those of you who know the rom. i would like to find the internal id for a 2G. i have been poking around a rom but all that hex makes my...
I was having tuning prolems with my maft. I finally got around to buying a burn2. I uploaded the bin off of the chip I bought from jktuning. Here is a copy...
Corrected to work for GVR4/1G DSM Original code: D6 8b C1 2b 23 03 5f d7 8b db 88 25 04 c1 bc 25 02 c6 bc d7 82 and 'means' the following (which I'm sure most...
... Excellent point, lol. My bad, didn't think to update it as I just searched and found it. The location is 6D5E on my Australian GVR4 which has seemed much...
Currently doing this myself on my GVR4. Once all finalised and I get some time to post it up, I'll have the info up here. I'm making it so that there are 2...
I am running the enclosed eprom bin. 1 extended maps 2 750 injectors 1.4ms deadtime at 13.5v 4 5000rpm studderbox 5 8000rpm limit i installed a new sensor and...
I can believe that you have no knock, as rich as those AFR maps are. You have them set even richer than stock, like 9.3:1. And, your deadtime seems way...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
