Hello. I made the jump back into the dsm world this weekend... I picked up a cheap non running 1g (needed a coil). I was told the car (90 1g awd) had a eprom...
I have been working with nick's Speed density code for a while and decided the other day that I wanted to program my EGR solenoid as a multipurpose triggered...
Working with a friend of mine's FWD car has been a pain trying to get it to hook up. In search of traction aids, I have had good luck on AEM cars with VSS...
... Anyone? How about this. Can someone tell me if it is safe to put my dvm on the line out to the boost gauge? I would like to see how many volts this ecu is...
That's strange, because I thought for sure the Mirage ECU was identical to the 1990 DSM ECU. I actually had one here earlier this week for socketing and caps!...
Hi guys I have a 93 eprom ecu that when turning the ignition on makes the rpm gauge to jump to 4k steady (engine not running) The engine barely starts and it...
... Hmmm. No resistor or jumper on r107.The spot is there on the pcb,but there is no resistor or jumper wire. Is it safe to solder in a resistor? Maybe the pin...
The ECU does NOT drive the tach in the dash, but they both do share the tach signal coming from the transistor. The ECU only uses the tach signal to check to...
Can you check to see if there is a resistor next to it in the R110 position? It would appear from a picture I have that the Mirage Turbo ECU has a resistor...
I have an '89 Colt GT 4G61T. I have not taken the ecu out to look at it since I just bought the car but if anyone wants me to look at the ecu for reference...
I forgot to add, there is no boost gauge or light or anything in my Colt. Its a factory turbo car but has basic options, crank windows, no cruise control, no...
I'm just curious, because I can't find any documentation as to what pin #3 of the Mirage Turbo is used for. If that resistor is installed in R110 I'm...
I got that used ecu from ebay. The guy told me the car ran well when he took it out and then left it for a month or so on a shelf. After that he put it for...
Yes, the power transistor has the tach driver in it that splits to feed both the dash tach and the ECU. Did you solder the new caps to BOTH the top and bottom...
Yes, that's exactly what I would have expected in pin #3 could be used to drive a lamp in the dash. Its the same value used to drive the CEL lamp. I thought...
It would be awesome if you get this working. It's almost a necessity on a fwd car. I hooked up a toggle switch in one car I was working on, so the boost...
I am kind of in the same boat. I have a 93 AWD that has a few mods (e3 16G, exhaust, J&S) and has an extensively modified ROM with maf compensation, timing,...
You could keep using evilscribe, but I would recommend tunerpro. All you need to start with is the xdf file. Open the XDF and open the BIN, start tuning....
i switched and will never go back :)Â - i think tunerpro only recognizes the files that are 16k - and evilscribe is 32k IIRC - so if u were offsetting to...
Switching between 32K and 16K bins in tunerpro is easy. You just change 2 settings in the xdf file -- the bin size and the base offset, which are found in the...
Tunerpro seems to be getting quite popular, so I now offer the option of giving people an XDF file with their 1G, 2G, or EVO chip. It will be interesting to...
ive been reading a lot into burning my own chips for my 1g. i would like to go to speed density. ive spent some time on dsmap but have been unable to find the...
Coming from the Honda world and want to learn all I can about Mitsu ECUs. Can someone quickly tell me the years of each car that each gen covers? Thanks!...
http://www.dsm.org/ http://members.shaw.ca/costall/1000Q/ Jeff O. ... ECUs. Can someone quickly tell me the years of each car that each gen covers? Thanks!...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
