Hi all, A friend has just added a garrett GT3540 turbo onto his GVR4. Its all good and well however using the existing stutterbox at 5500rpm doesnt bring any...
The result was good, except for one problem. The first time I did it with a Sleeper 16g (laggy turbo for its size), I overdid it. It turns out that big...
I have a GT35 on my car and have my stutterbox set at 5500. It launches well with street tires. I tried a higher setting but it spins the tires and is less...
The turbo is spooling fine once the car is moving, thats all fine. He is just looking to build boost whilst the car is stationary. Any other ideas on this...
Hi, my friend has 510 Denso injectors. I want to compensate them, found some info in Database: "Denso 510 Varies Yellow top - Deadtime map: 14 18 1D 26 35 1...
I usually use the stock values, as they are very close. But, I think the actual 510cc values, from the E952 chip, are: A9 51 35 25 1C 17 14 Jef O. ... 26 35 1...
Has anyone used a TMO cable with the usb adapter to datalog a 1g? I tried mine and it failed to connect. I also tried using a null modem adapter which is...
... are a ... downloaded from ... flash ... out ... definition ... am a ... H8/539F ... though. ... or ... It would help if anybody (carld?) provides link to...
Was the USB Adapter one with a FTDI chip set? It should work if you have a FTDI adapter and a PC cable. If using a Palm cable you will need a Null Modem...
... EvoScan works perfectly with the TMO cable in the USB adapter, but this adapter has to have the FTDI chipset. I use this combination on the 1G Mitsubishi...
As the question says, has anyone ever done this? I need to change the scale for the egrt wideband imput to read 9:1 to 16:1 instead of 8:1 to 22.5:1 afr. The...
You can recompile MMCD the source code is free and available. You need Cgywin and the palm libraries. There is a site that tells you how to set everything up...
I actually want to make some edits myself, but for much different reasons (adding some 3000GT stuff). Problem is, Clint Battersby got all ticked off and took...
... The 1.7 source is a different tree by Andrew Shinn, IIRC. The last release from Clint's tree was 1.6g just before the big numbers and peak were added. I...
No 1.8 code here, but I did do some edits to the 1.7 codebase (starting from Andrew's 1.71.01132005 which was the newest I could find) to support additional...
I would like to add in MMCD possibility to connect by Bluetooth. I have Sony Clie PEG-NZ90 and there is no RS232 port. There are problems with baud rate in...
... What would you be using to provide the Bluetooth attachment to the ECU? Like USB the key issue is that the interface hardware and OS support the setting of...
... your ... xdf ... if i ... <kyanox@> ... disassembly. The ... better can ... developing a ... disassembly is ... too bad ... images. ... modiify ... that i...
... datalog ... just a stab in the dark, but scence nobody else has replied yet... could it be the baud rate?i now i have problems with my usb converter and...
I've successfully used EvoScan 2.2 with a 1G PocketLogger cable and a null modem adapter. I haven't had the chance to try 2.3 yet, but I can fire it up...
Hey there I've done quite a bit of reading here, but I've still got a LONG way to go when it comes to learning ECUs. First off, a great big THANK YOU to...
It would be wonderful to have Bluetooth to RS232 converter which could be set to 1953 bps, but I don't have one. I have BTD-433 (other name LM058) with...
I am using the 32k code, it is what most people seem to use. I have used the 16k as well but it seems like most info is written for the 32k, I am also using...
... There is no difference between the 16k and 32k EPROM images when it comes to the actual software. The difference is that the 32k image has 16k of padding...
Very helpful. Thank you! I did end up modifying the 32k image since the initial changes were simple. The car runs and I'm getting 14.7 AFR at idle with the...
Hi! You know what a feeling to hit WOT witch A/C on highway! I cannot find this code here. I think you use it, can anyone share this code for E931? I think, it...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
