The Only Dating Service Exclusively For The Over 40 Age Group Only Love Can Change Your World! Would you like to meet other singles in your own age group? We...
I serviced my injectors today and now the fuel return line is leaking from one of the pipes that is brazed. So either I have to braze it in hopes to fix it. Or...
Hello everybody, I am new to the group and I have a 1988 Dodge Ram 50 and I have an engine maintenance light that has come on. How does one check the engine...
If it is the light that I think it is, you will have to get into the dash and turn it off with a switch. The Haynes manual shows how to get to the switch. It...
Jon, I'm not sure about the ' 88, but the older ones had a switch that was operated by the odometer, once the light was switched on, all you had to do was...
Gary, I'd pull the radio. It could be, someone put an aftermarket radio in, and then put the OE back in, to sell it. If the wiring is mixed up, or not...
Where would I find this switch? Thanks! Jon Bradshaw ... From: Fred Rupert To: dodgeram50truckowners@yahoogroups.com Sent: Wednesday, November 08, 2006 10:59...
Got my head to hold and had her running for a full day. Now I can't get it to start. When I'm turning it over it cranks over about 4 or 5 times and then there...
if it is same as my 87 and it is the egr light it is behind a small popin plate about 1" by 2" wide on the lower right side of the dash. looks like a cover...
Thanks! I'll go look for it today Jon Bradshaw ... From: richard knapp To: dodgeram50truckowners@yahoogroups.com Sent: Wednesday, November 08, 2006 12:07 PM ...
Yes. I pulled and reset my distributor as instructed in the manual and played with different advance positions. It's as if fuel pressure is building up in the...
Just a silly question-- you did check the fuses first? If so, I'd pull the radio as fred stated first. If that doesn't work, you might check the fusible...
Is there a chance the cam is off a tooth ? The intake valve should be closed during ignition, so either the igntion or cam timing is off. . . Tony Zara...
the puff from the carb leads me to think same line as Fred. the only thing that throws me is the day before you said it ran all day. is it a jet valve head?...
Whoops, , ,forgot about the Jet valves, I haven't used them in so-o-o long. Good call Richard. richard knapp <richardknapp66@...> wrote: the puff from...
Fred, Thanks. It does look like my cam is a tooth off the mark on the timing chain. I must have put it back together with some slack. I can't figure out any...
It's the non-jet head. Thanks for brain storming this out for me guys! ... only thing that throws me is the day before you said it ran all day. is it a jet...
Update - Back together and running strong. I had not properly set my chain to the slot mark instead I oriented it from TDC so I was off a couple of teeth. It...
Tony, Glad you're running again, and glad I could help. . . Tony Zara <tall_italian_dude@...> wrote: Update - Back together and running strong. I had not...
Alright I am ready to get rid of my 88--long story short head gasket blew at 188,000. Rest of the truck is in pretty good shape...minor rust. Lots of good...
Just bought a 1987 Dodge Ram 50 Sport. 4x4. Fun little rig. I do have a mechanical issue I was hoping to run by you guys. Every morning when I take the truck...
Braden, Welcome to the club! What I'm suggesting should not be considered permanent, this is only a trouble- shooting suggestion. The carbs, are problematic on...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
