... instruments. If anyone else has one that they will part with, or knows where to find one please let me know. Thanks ! ... idiot lights. It only has the...
I thing that my truck should be getting better mileage. It is an 88 ram 50, 2.0, auto trans, no air, 2wd, and I put a rebuilt carb on it from import carbs...
WE ARE HAVING SHIFTING PROBLEMS HAVE TO GET ON IT IN ORDER FOR IT TO SHIFT. DOES ANYONE KNOW IF THERE IS ANYTHING THAT MIGHT NEED TO BE ADJUSTED ON IT TO MAKE...
Check the fluid in neutral, while at idle. Change pan filter and use mopar oil, if it doesn't spec Dexron. Other than that, if it isn't electronic controlled,...
Planning on selling this 1Q 2007...single owner, 150k miles. Runs well, been able to pass TX emission standards. However, needs new carb and some body work....
As a follow up to the electrical problem: As you suggested I checked the starter, but it turned when I shorted the leads on the solenoid. I changed the...
Don, That's great you got that figured out, I'm not sure I even want to know how the battery ended up, loose and upside down!? Good recovery. Don Barnes...
so Yahoo doesn't have a great message search function. I love my 88 D50. got it for free and i'm keepin it! i'm looking for a lift kit for it. possibly even a...
I am new to this group and will be searching for info on this '74 Dodge Ram truck. I guess you would call it a truck, the top comes off. I had not seen one in...
Welcome to the club, If it's 4wd, using ' 91 or newer Montero upper/ lower control arms, half-shafts, etc. will gain you about 4" fully cranked. If you get the...
No sadly its 2wd. Any ideas? -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.10.9/417 - Release...
How come more guys don't use a Holley 2 barrel? I've used Webers for years on many cars only because I'm lucky enough to have spares but the thought has come...
What's the biggest tire anyone has used? I have 30x9.5x15 now and wonder how far I can go easily. Have not cranked the torsion bars yet. Thanks for your input...
Mike, I have run 265/75x15's, they're slightly taller than 31's, but my bars a re cranked and my fenders have larger than stock openings. I will be able to run...
Hi folks, I'm just wondering if anyone here has put a Weber (38DGES) carb kit on a 2.6L engine. I'm installing one on my rebuilt '86 2.6L engine, but the...
Hey folks, I got it! Turns out the instructions told me to have the linkage facing the rear wheels. Totally backwards. But now I'm wondering if what might be...
Weber sells an OEish air filter assembly that fits their carbs. You could hook your PCV & canister hoses to it. Or, cut holes in the base of your new airfilter...
Thanks for the reply Fred. As I see it now, I have 3 vacum inputs; one on the manifold below the carb, one on the base of the carb, and a hole in the base of...
Hey all, Just wanted to give you a heads up! I was bragging about Radiator.com and their low prices, etc, etc. I don't know if Craigs has next day delivery...
The mounting kit that I bought was pretty straight forward. The linkage went directly to the throttle on the carb which, when properly mounted is on the side...
Thanks for the reply Don; What kind of truck did you put it on and was it the 38 DGAS? On my '86, 2.6L 5-speed, the only way it worked out with the supplied ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
