Can you explain the terms ECU and PCM? I have the donor truck in the driveway so I should be able to swap anything that needs swapped, I am just not sure...
ECU = Engine Control Unit. PCM = Powertrain Control Module In rare ocurrances, the car might have both of these, usually it's one or the other. Manual trans...
... <canook2u@...> wrote: I have a 87 Ram 50 I am parting out. The engine still runs good too. I could sell you the short block if you are interested. Make...
Hi I have a 1987 Dodge RAM 50. It is not currently running due to electrical problems. It also is in need or a new or working carb. Transmission and engine...
Hi I have a 1987 Dodge RAM 50. It is not currently running due to electrical problems. It also is in need or a new or working carb. Transmission and engine...
Just FYI, a head swap from a between a '79 and an '86 will not work. I'm pretty sure now that the '79 to '81 engines are unique unto themselves as trannys also...
Hi there A gynecologist was getting tired of his job and decided to switch careers. He'd always enjoyed tinkering with engines, so he enrolled in a school for...
Some blocks are 12+" across at the rear and others are 13+" across at the rear. What has that got to do w/ cylinder heads? I remember racers using the oder...
Please be careful how you crop and paste who quoted what. I don't mind being quoted, but I did not write all that this email claims I wrote. . . You make it...
... the fuel return line, ... Well, I traced the fuel line, cannot find a filer, think I will be adding one asap though. It has been hot as h.e.ck so I was...
... Turned ... the ... the ... I grew up under the sign of Wile E. Coyote (bad luck) so of course Mine cant be that simple... Traced the whole fuel line along...
Depends, some years of 2.6's,(auto trans), had the smaller bell housing mounts, they will bolt right up. Most 2.6's have 13+" across the lower bell housing ...
The stop for my turn signal switch broke, now every bump the left turn signal goes on. We no longer, have a Mitsubishi dealer here in Tucson, I may be able to...
If you can't get it here, then you'll have to settle for used. Good luck ! www.MitsuPartsDirect.com ... __________________________________________________ Do...
NOT SURE 87 AND 92 DASH IS THE SAME. I'LL HAVE TO CHECK IT OUT AND ALSO CHECK OUT HOW TO TAKE APART. THANKS I'LL GET BACK TO YOU. basker <basker@...>...
Thanks Fred, Could not find one used, seems they are crushing all the older mits and d50s around here. Did not have one at the link provided. The local Dodge...
Were any of the 2.0 liter pu's available with 5spd tranmissions, if so how hard is it to swap from 4 speed to 5 speed. ? Peter [Non-text portions of this...
Hey all, I'm looking for a grill for my '86 ram 50. It's the duel headlights.I found one on ebay. 22.00 for the grill and then 45.00 to ship.Does that sound...
Got in my Ram 50 this morning and the the place I put the key in went up in smoke. Now the starter will not disengage. I have a starter button in my tool...
Patrick, I'm only guessing, you mean bypassing the ignition switch and just using a starter button?!? What about the accessory switch, etc? I have an igniton...
Try these guys! http://www.dodgepartstore.com/dodge-ram-50-pickup-parts.html ... __________________________________________________ Do You Yahoo!? Tired of...
... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com...
Attn: Club Members, A friend of mine, (Parts Mgr. @ a Dodge Dealer), has a couple of emission recall kits, details below. The kits will be free to those who...
I will probably be buying a remanufactured engine for my '79 D50. Will the air conditioner compressor and tensioner pulley from the 2.0 engine mount up to the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
