Fred, I probably could have save posting by just emailing you directly, but I have a dumb question, and figured I would just ask it in public... Do I have the...
your right about the g54b being a 2.6l and my fauther in law(who is a lot mechanic for dodge ) told me my 86 2.6 has a timing chain and that if it rattles or...
If your engine is a 2.6L it is a G54b. They are chain drive. Some of the 2.0L's are chain, some belt. Mazda actually used the Mitsu. 2.6L for a couple of...
Hi! New here...just bought an 82 D50 4X4 5sp today! 63,000 original miles.... Love it, but so far, it won't kick down from high idle (upwards of 2500 rpm's)...
Sounds like a stuck choke, you have a 24 year old vehicle w/ 63K miles on it, I'm guessing it's done a lot of sitting. Before 'doing' anything to it, (other...
Mind does the same thing, also at about 5000 rpm it falls on it's face. I replaced the filter (fuel) and drained the gas tank. It help for about 3 weeks, but...
If your delivery line, (fuel), is corroded and it cannot deliver the quantity of fuel needed for running above 5K RPM, just changing the fuel filter won't fix....
Hey guys just purchased a ram 50 with 2.6 engine automatic with overdrive transmission 1 owner with 81,384 miles no dents or rust runs great applied soap and...
Hey guys just purchased 1987 dodge ram 50 truck 2.6 engine with auto transmission with overdrive 1 owner with 81,345 miles washed and wax looks very good runs...
I'll let you know how mine goes, but mine runs perfect once warmed-up. Sounds like you've got other troubles.... Eric ... filter (fuel) and drained the gas...
Someone please tell me that this isn't right: Just bought an 82 D50 w/60,000 miles, the big 4cyl. 4X4 5sp. It idles high (above 2500rpms) while cold and will...
Congats, on finding a truck w/ such low mileage and good condition. These trucks are mostly bullit proof, but have two weaknesses. 1). The carburetors, are a...
Hi My mother in law (MOL) has an 89 Power Ram 50. the thing is in really good shape except for the engine. Apparently, it overheated at some point and...
There is a adjustment for the fuel air mixture behind that plug, but I doubt that's the problem. First I would use some carb and choke cleaner on the linkages....
I believe the '82 has a water choke. With the air cleaner removed look for two 1/2" OD hoses going to the firewall side of the carb. They attach to and...
Just a little confused, I'm thinking the V6 came into play in 1990. Atleast 3 times in your email, you refer to " heads ", is that because it's a V6 and has...
My mistake:) I am used to dealing with a 300ZX, so the term "heads" is stuck with me. It is the 2.6 G54B Mitsu engine in the truck, so it should be one head....
If you're certain the head is cracked, you can have it repaired or replaced. Check w/ clearwater or Marnal. Use new head bolts, or ARP head studs,(reusable), ...
well, according to the MOL, she said it overheated. I am assuming I will replace the water pump, head gaskets, coolant flush, check the radiator for leaks....
I was wondering if anyone could help me out, my balance shaft chain broke, replaced it but the top, right bolt broke that goes to the chain tensioner guide....
You can swap out the head in about 1 1/2-2 hours easily. I did it last time by: Drain the coolant so it's below the level of the bottom of the head (about 1/2)...
Anyone have experience with the PACE header for the G54B? Was thinking of giving it a shot but the flange seems way different although the application says it...
Do you mean pacesetter? If so, it's junk, get a Doug Thorley, you'll be much happier w/ the quality and performance. Kevin Van Winkle <kvwinkle@...>...
Getting one. . .what? A bolt? A tensioner? A blanace shaft eliminator kit? Fred armymech99 <sihammock@...> wrote: I was wondering if anyone could help me...
I've already bought a timing chain kit and replaced everything from the chains, sprockets, and gears to the guides. I just need the upper, right side bolt...
Try your local Mitsubishi dealer. . . armymech99 <sihammock@...> wrote: I've already bought a timing chain kit and replaced everything from the chains,...
Also, I have a taillight assembly with lens for '80 thru '86. I had to buy the set. I don't need the one for the right side.Also, I can throw in the left side...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
