I used a set from a Honda CRX. Used the factory,(bucket), runners and bolted the Honda seats to them, piece of cake. z74260 <z74260@...> wrote: I know...
I found a reference in another web site (automotive.com) of a problemm with the seat belt buckle. Has anyone heard of this recall? The NHTSA i.d. number is...
I remember that recall well. Almost all Japanese cars and trucks were affected. At the time the recall was announced, I owned a 1990 Plymouth Colt(Mitsubishi...
yeah i had that same recall in my truck they replaced the whole thing but it took four trips to the dealer to get it done right they first time they broke one...
Thanks! I couldn't find anything underneath. ... panel and it was always on the lower right hand side. If I'm not mistaken, 87 through 92 were the same. ... or...
Your quite welcome erwine12 <erwine@...> wrote: Thanks! I couldn't find anything underneath. ... panel and it was always on the lower right hand side....
Check out this web site www.batfa.com Import your own right hand drive d50 or pejero. Friend of ours says it's really not that hard to do(he's from Japan...
Met my fiance here, hehe. Thought I should share it with any other guys who are worried up winding up alone like I was. Check it out...
brenda.warnes7330@...
Dec 9, 2005 8:32 am
5449
Thought I should pass on my knowledge to all you guys (and gals) on here. I know like heaps of men I am pretty shy when it comes to going up to someone. I've...
brenda.warnes7330@...
Dec 9, 2005 8:47 am
5450
i took mine from an 86 mazda 323 and just took the dodge adjusters off the bench and put it on the bucket all i needed was a hack saw and hand tools sockets...
Hi ya'll. I'm new to this so cut me some slack. I have an 87 Dodge Ram 50 2.0 2wd 5spd. Whenever I let up off the gas my engine backfires like crazy....
It could be your EGR, could be your cat, could be your timing, could be your fuel, Yes, it could be your carb. Might I recommend buying a Haynes manual and...
Hello Dodge Ram Owners, Has anyone heard of a engine conversion kit for the 1988 Ram 50 4x4 . My engine 2.6L went down the drain,and I was told that I can put ...
Many people put V8's in their 2wd's. W/ the 4wds, you're better off going w/ a V6. You might still be able to get the Buick 3.8L V6 conversion from Advance...
hey philip i was just wondering if u do the swap what ru gonna do with the old cooling system from the 2.6 cause i was involed in an accident with mine and i...
IF YOU DON"T STOP READING THIS AT 10:22 TONIGHT I WILL FUCKING KILL YOU!! DON"T TRY TO SCARE ME WITH YOUR FAGOT CHAIN MAIL BUL SHIT. FUCK OFF ASS HOLE!!! ...
you know what i dont know you but i clicked on the wrong darn contact list ok it was a frigin accident. o and dont start this cussing junk again the list...
I am new to this, looking for some help. I have a 86 ram 50 2.6L, the 2nd barrel floods, it also continues to pour gas into the intake even after the thing is...
Do you live in a state that requires emissions testing, if the anwer is no, buy a Weber 32/36 or 38/38 carb and kit. The kit is offered thru several on-line...
Thanks Fred for the advice, but was hoping to find a cheaper method of fix. For giggles what would a webber cost? My bother-in-law believes he has found the...
You know, replacing all the vac hoses is not all that expensive and not a bad idea, especially as you approach the 1989 feedback carb, mine has no less than 15...
Hey guys, it has been awhile, well, I was driving home two weeks ago from some exhausting final exams, and I decided to get off the freeway because of traffic...
Well, it's not going to be an easy fix. I need some advice, what would be easiest & cheapest. A. Take the old carb off and rebuild it and hope that does it. ...
Rebuilding the carb might be cheapest. On-line, rebuild kits go for $30-45. There's even a Tomco kit on e-Bay right now that I think fits your carb. But...
Help ~ Will a 5 spd Tranny from an '81 2.0 2wd fit/bolt right up and work in an '87 2wd ? Thanks to reply, Off line OK too. Merry Christmas and Happy New Year...
Does anyone know if their is an aftermarket V8 conversion kit for an 87 ram 50? Any leads on this subject will be greatly appreciated. Thanks and Happy...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
