They come with used ones, unless you would want to spend $80 more for new ones. I check each jet valve and make sure they are ok. I take them a part and clean...
P.S. With the used Jet valves, I lap in the old jet valves, and put new O rings in them. They come with used ones, unless you would want to spend $80 more for...
I need to know what vehicles had a fuel injection 2.6L without turbo. I want to upgrade but do not want to convert to a turbo computer. Any info would be...
Hey, Better News. I can recondition the old jet valves for $10!!!! So never mind that $80 for new jet valves. Just $270 For A completely rebuilt head, ported,...
Steve, How much do you charge to install larger v. seats? I'm considering 48mm, (+2mm), intake valves. I can supply the valves and seats. Also, it sounds like...
Robert, Just a thought, I have been building stock and hi-performance versions of the Mitsu engines for close to 20 years, and one thing I can tell you is, if...
Well, I started working on Mitsubishi engines about 2-3 years ago. I rebuilt my little 2.0, I have rebuilt a Mitsu 3.0 (about 200 HP at wheels), and a little...
Fred I took your advise about changing my jet valve head for one without and,I truly beleive that was the best thing I could have done,in turn I have told...
Hey all, Due to my recent problems... I've decided to install a turbo system. My friend is giving me his starion w/ bad main engine bearings. So i'm going to...
Robert, If I may, I do not recommend using your bottom- end. If you're going to turbo, use the turbo block/ pistons/ rods/ crank, etc. If you have access to...
Jim, Now that you've gone to a 2 valve head, if you want a better cam, let me know, I've got one that is used, but you wouldn't be able to tell it by looking...
Does anyone sell a full 4-link rear frame/suspension setup for the D50/Mighty-Max? I'm looking for the complete setup, not a 4-link system for air-bagging the...
ok, since my dad is hell bent on not putting on the webber carburator that my girlfriend got for me and insists on rebuilding my old one im asking for help. He...
Sean, 2 things to check, while running the engine, rev it up some so it starts to bog down, then pull your gas cap to see if there's a vacuum building up. Your...
I had the same problem when I changed the my fuel pump. The two lines I hooked up that go from the pump to the carb, were switched around. I would suggest ...
Hey Sean, What size Weber is it, and what are your plans for it now that you are not installing it? I have a 2.6 that I am rebuilding and would love to drop a...
Does anyone have a remedy for the God-awful battery connection on a 1984 D-50 2.6 engine? The battery holddown post was a piece of sh*t, acid from the battery...
Get a new set of batery cables for a total of $10 that you can get from any auto store. look around online and threw catalogs for the hold down for a batery....
oh yeah, you may want to look in 4x4 shops/magazines for the batery tie downs. a lot of 4x4ers use extra bateries so you should be able to fine a new hold down...
First take a semitruck inntertube cut a piece to fir under the battery and that should take care of the acid eating through,monthly wash out the box with...
. . "good luck and remember some kids read these email so try and be careful what you spell" . . Sorry...just a bit peeved about something which someone...
I'm not sure what size battery I'm using, (I'll try to find out for you), but even though this battery is smaller in size,(shorter), it has plenty of juice, I...
i have a question.they dont have emmission testing where i live.yet.my question iscan a person take the mitsu. eng. out of a d50.and put in a chevy v-6 and be...
Some variables to consider: do you have a posi? What size tires/ wheels are you going to use? The following link is to the performance D50 club, Some of these...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
