Hi, I'm no expert, but it looks like you are leaking "melted" bearing grease. How is your rear brake, because chance are the shoe is probably all greased up as...
You don't have a vacuum port on a K65. I use a machinist measuring tool to get both slides exactly at the same height say at mid throttle and she runs fine. ...
... I had to make my own vacuum ports for my Edelbrock carbs. I made a hole on the rubber adaptor between the carb and cylinder and pushed in and superglued a...
Bad link in the body of your message. Too many spaces! maybe put the link on a separate line alone by its self? Rik & Jami Nebeker We love our computers...
Thanks for all the advice. I decided to start by replacing the coil. My existing one is delaminating at the ends. I ordered one of Lloyd's unit as it fits...
Thanks Dean..... I meant no disrespect to Lloyd. I have only heard good things about him. I was simply afraid that my emails had not gone through. Please have...
Lloyd was only shutting down his aviation electronics business.....tired of dealing with the feds i think. I think he intends to keep messing with dneprs as...
... the link on a separate line alone by its self? ... Yahoo puts random spaces in web addresses sent to group messages. The only way around it that I know of...
Please include me in the correspondence with Lloyd. I have bought parts from him in the past and have not been able to get a hold of him by the old Ramco...
Hi, Well, finally I get around to trying to put my Dnepr/BMW Hybrid back together but I am stuck at the transmission. Putting the output gear shaft together I...
Hello all. A few weeks ago I asked my friends Alexi and Oksana who work for the Ukrainian Government to visit Arbalet and check out their place. They now...
My Dnepr MT-11 has K-65T carbs, I am having a little issue with them. Should I rebuild them or replace them? If replace, should I go with the K-68 or a Mikuni?...
Afet much cleaning of grounds and replacing cracked wires, I have managed to get my spark back - but - In dealing with other problems, I had to take apart my...
Soo... I have been lurking and believe I will be picking up a "somone elses project" MT11. Where is the best place to get a manual and parts? Thanks, Emmett....
Emmett...I have repair shop manuals in English $25.00 including shipping in USA....I still have a large parts inventory including some USA made items I had to...
Hello from Germany, I could offer you a new manual for a MT11 for 19,00US$ incl. shipping from Germany to USA Best Regards Markus Reitz WWW.RUSSENTEILE.NET...
Peter: Note Lloyd is back on....also I discovered when cleaning my switch and horn button assembly that when I disassembled them and soaked them in denatured...
Thanks Dean, I noticed Lloyd had been on board a couple days ago. Hopefully I'll hear from him soon. I tried the NAPA route but with no luck. At least...
I am selling my MT-11 and a leading link front end. This one is a RAMCO MT-11 set up by Lloyd in Seattle, and is just coming up on 1100 KM. You can see it on...
I have a printed Engli version that I would gladly copy in trade for some used parts, etc. Matt:19:14 , Josef Spielmann, Certified Electronic Technician Owner,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
