If only..............these photos were shown nightly on the 5:30 news hour.....Ken ************************************** See what's new at http://www.aol.com...
oN MY D-16 THE KILL SWITCH ON THE RT HANDLEBAR IS NOT WORKING - PROB IS IT ALSO CONTAINS A SWITCH FOR A SPOT MOUNTED ON THE SIDECAR SO I DON'T THINK IT'S THE...
Sounds like someone has been doing a shade tree mod. I would revert to the std wireing for the kill switch, get it functional, prior to a mishap ( stuck ...
I had a switch problem, although it was for the headlight. Drove me crazy until I found the wire came loose from the switch terminal inside the switch. If...
It could also be that the spotlight overloaded the switch and damaged it. The spotlight would be a relatively large load compared to most everything else adn...
Someone was having trouble recently with their bike running for 10-15 minutes and then shutting off. I'm having that same problem now. It appears to be the...
If the Battery Kill Switch is wired as you say, then it should work as wired, that is if its the ONLY path to ground. If there are other wires connected to...
it wasnt me with the trouble but this is the sort of nonsense you get from a blocked petrol tank cap breather hole,lack of valve clearance.. or ..an ignition...
If it's hot consider vapour lock. Had me stumped for about 2 days. AceCome check me out on InkedNation at http://www.inkednation.com/tattoocurator To:...
The kill switch under the seat should run off the neg terminal to the frame. That is the correct way to wire it. I would look for another ground wire from...
THXS TO ALL WHO COMMENTED ON THE KILL SW PROB. A PARALLEL GRD WAS THE PROB FOR THE ELEC. KILL SW. NOW IF I CAN JUST GET THE ENGINE KILL SW TO FUNCTION ! HJN...
Ended up being the coil breaking down after it heated up. I replaced it and it's running fine now. Thanks for the help! -Barry ... From: Ace Daniels...
The bowl on the petcock is leaking on my bike. What is the best style o-ring to use on it? The flat style that is similiar to a water hose o-ring or the thin...
Hi all, I was looking at buying a dnepr and one of the only dealers i saw stateside was Dneprworld in Ohio. Has anybody purchased from their before? Any...
RUN AWAY RUN AWAY jbrady_2006 <jbrady_2006@...> wrote: Hi all, I was looking at buying a dnepr and one of the only dealers i saw stateside was Dneprworld...
Have a gander through http://autos.groups.yahoo.com/group/dneprheads/msearch?query=dneprworld&charset=windows-1252 ________________________________ From:...
Jeremy, I have a kit bike from Yuri (I'm the second owner). This one has 29km. Wasn't running for the previous owner and after going through it, it usually...
I'm getting ready to change the oil in the differential and noticed in the capacity section of the manual it call for two seperate amounts for this unit. The...
Looks like I'm full of questions to day. The threaded bung on my late 80's early 90's (close as I can tell) MT-16 gas tank, does anyone know what size and...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
