From the photos looks like the sidecar body took the impact. I'd pull the car body off and try to get some measurements on the frame from someone with a 2wd...
I have a nice MT16, 1200 miles, OD green, 4 knoby tires with square rims , electronic ignition, lugage rack and jury can. Runs great everything works. Box of...
Urals are being currently produced and imported into the US as DOT approved motorcycles. They now have 750cc engines with e-start pretty much all come with...
Hey Avery, Drop in anytime and we'll go for a ride out along the river, maybe cross at the ferry if it's running. Great photo ops around here. Also have a...
Here's a picture of a test installation showing a 1981 BMW crankcase bolted to the Dnepr gearbox using the prototype adapter. As noted on the picture, there is...
This is a picture of the bike I will be riding; it's actually a *very* extensively modified Dnepr, shown here in a 4 year old picture taken at a motorcycle...
CURD and Ural Canada are pleased to announce that we are ready to begin accepting registrations for our inaugural rally on 21-23 July 07. For more details,...
I also love my Dnepr. I'll go to the basics, the Dnepr was designed for the army (heavyer, tougher), and the ural is the civilian vertion of the same bike,...
Is there any on this board qualified to assign a value to a 1983 2wd Neval, with a BMW conversion? I am anticipating problems wtih the kid's insurance company...
Hello. Anyone near Arkansas have an extra/used pushrod cover seal laying around? I have had all those parts sitting waiting for my gasket/seal sets to get here...
In the photos section in the Neapster1 album you will find a drawing of the adapter concept which I posted last October 19th. I just posted pictures of the...
I am fitting CJ carbs to the M72 and hit a problem - the studs that should be on the cylinder were taken off to accomodate for the conversion to K63 carbs....
Strange how in my area there are only Lowes and Home Depot and they don't have such a great variety. Another thing is that the bolts that were holding the K63...
I do not own a M72 , but do own a MT-11 with K63/65 carbs. The studs on my carbs had 2 different thread pitches. This is very common the the Automotive field,...
Stephen, what you say makes perfect sense! I am about to go see my bike and make sure that's the case. I am jealous of the store near you. I wish we had one...
Yep, course into the alloy and fine outside. Of course, my TR6 has fine all the way - hence once stripped thread. Bah! Shouldn't be too hard to get studs...
Hello, 1 and 1/2 inch long. I have a MT-10.36/11 hybred, and just put on new heads, and one of those equlizer kits, so I had to put in longer studs, so I have...
Hey Mike, In my opinion, Lloyd and Scooterbob are your best choices, as they are licensed dealers in their respective states. Also, they specialize in Eastern...
I wish I knew just how much gear noise is normal for a MT-16. This thing is playing with my mind. When I rebuilt the engine after getting it from the Florida...
Check the timing gear. For some reason the woodruff keys used to secure the timing gear on the cam tend to be on the small side. over time they get word down...
