Hi all. It's been a while as recently changed occupations and moved to the east side of Washington state. But now I am where ther is much flatter ground on...
a great web site of info on /5 and /2 BMWs, and the /2 info covers the DNEPR tranny quite well. http://w6rec.com/duane/bmw/trans/ I really haven't had much...
http://dnepr.ural.free.fr/renovation_boite_ural.htm For the ral box and in French but with lots of pics. Should help. ________________________________ From:...
Thanks for the info guys. I remember seeing that French sight but it was several PCs ago. So thanks for sending the link again. I got her apart and found...
I created a photo album named "airncyclins MT-11. It has a pic of what my bike looks like when I first bought it from Lloyd's son, and a picture of the shift...
I had a problem with third gear this summer. Turned out when I adjusted my left foot peg it interfered with the travel of the gear selector pedal. Move the...
Check out my site for magnetic drain plugs, www.theborgenterprises.com , the Borg Aaron Miller <airncyclin@...> wrote: I created a photo album named...
Hi Folks, New question! I am rewiring my MV-750M. The problem is that all of my wiring diagrams do not include how the electrical socket under the driver's...
If you look at the wiring diagram for the mt11,16 in the folder wiring diagrams, you will see item number 18, which is the socket, wired directly across the...
if its jumping out of gear, the most likely cause is that the foot clutch (auto de-clutch mechanism) is not adjusted correctly. No need to pull the gearbox...
Thanks for the link. That's a neat looking sight. I've been considering that Dr Harm points plate. I jere good things about those. ... From: the Borg...
Whats and auto de-clutch? dneprider <no_reply@yahoogroups.com> wrote: if its jumping out of gear, the most likely cause is that the foot clutch (auto...
The "dneprglide" tranny has an automatic clutch that is engaged when you push the shifter past the shift point. It has a rod that automatically engages the...
I personally run a Dr. Harms plate and like it alot. The dnepr points system is ok, but a little hard to adjust and the stock condensers are not very good....
There have been several posting here regardng the need to "press and hold for a second" when shifting gears in order to make a positive shift. There is...
Hagon's can't recommend something for any russian bike, although they do now do the rear units. Is there anywhere else in the UK where I might get some ? Or,...
Hey Bill Be sure to put in a fuse on the hot (neg) wire to the socket. I had to rewire everything on my bike (MB-750) and have in line fuses on each hot lead...
Hey Bruce, Glad you got it the way you want it! School has kept me very busy so I haven't actully gotten either of my bikes up and running. I was really...
What model of GM point do you ask for? Cheers Rick ... From: the Borg To: dneprheads@yahoogroups.com Sent: Sunday, December 03, 2006 8:14 PM Subject: Re:...
All GM V8 points and condenser were the same from 1958 to 1974. Just go into the auto parts store and pick any GM car with a V8 from these years., the Borg ...
After only a month or so, Haulbikes has finally delivered my Dnepr! Yippee! I spent a little time today going over the bike and noticed some problems. 1)....
A fresh Dnepr tranny is usually a little hard to get into reverse for a while. Well, even after a while. Rock the bike back and forth and make sure it is in...
... Will do. ... Sounds good. I used to have a Karmann Ghia that would do the same thing. The solution for that was to take a screwdriver by the business end...
Lee several issues to look at. when the bike is running and the bike is in neutral you can pull the clutch in and out when you try to get into reverse and it...
... I carry a Crescent tool set, it has metric and SAE tools in it and it fits perfectly in the bottom of the trunk. I also carry an AAA RV card and a cell...