So how do i find out what the ohm is? Because I have the old points system i figured that it should be 5ohm. Is that so? ... so, just match the ohms of your...
Anyone who sells parts for the Dnepr/M72/K750 should have it. I know Roman from Echokg (ebay seller) sold some just a short time ago. You can email him and see...
After a week of down time replacing a rather worn and wobbly alternator gear, and welding the ever so leaky balance pipe to the mufflers; I decided to get a...
OPERA: San Diego Opera is looking for a working WWII-era German military Zundapp motorcycle or a Russian-built Ural motorcycle to use in its production of...
... was starting to bubble away into oblivion. I've used "barbeque" black, on the pipes. (The stuff that's famous for coming up rather grey.) It holds up well...
Christian.......Send back the broke clutch cable & I will end you another new one....I want to see where it broke.... Lloyd Lloyd J. Lounsbury ... From:...
Check the angle of the cable. Mine had a wicked angle between the engine mounted clamp and the clutch arm. Had to adjust (bend) the bracket. That would break...
The clutch cable that broke was NOT from Lloyd, it was from a good old local american custom bike shop. The cable Lloyd sold me is my backup, which is now in...
Christian, I'd like to ask where the cable actually broke. Was it at or close to the lever, at or near lever connection? You might want to address the lever...
Dave, my breakage occured where the end of the cable is binded at the end. This failure cased the cable to slide right through the keeper on the lever,...
My "hi temp" exhaust paint did the same twice. I sanded the pipe down spirts wiped it and painted it....it bubbled. Second time, I put on three coats.....same...
Dumb Question here: How "HIGH TEMP" is the paint ? I have seen it rated at 300, 600, 1200 and 1500 degrees. That's F not C for you non USA guys. All 4...
You guys are totally affirming my laziness in not painting my exhaust and just letting the natural rust color take over!, the Borg Of course, someday my ego...
With prices up, and we have had diesel threads, but what about another home brew for the Dnepr engine? The stock engines were ran by the Russian army on some...
I have had this leak, making a small puddle when I stopped after a ride. It looks like iut's from the real main engine seal (OHV MT-11). It settled down to...
Surely this has already been done but I can fine no info on such a Frankenstein transplant. I have in mind a bone stock 1600cc VW case with the standard thick...
Yep, been done many a time. Here's the best site I found...http://www.uralroikka.net/vw.html Look also at VW BMW conversions (plenty in Google land). Also...
It probably would with little work, but a Dnepr tranny and drive train is far superior by design to the Ural. You can convert a 2wd Dnepr to engagable...
As far as the Ural 2wd final drive goes ... at minimal the swingarm might have to changed.. but the Dnepr 2wd swingarm might work...... Good luck & keep us...
Ural 2 WD I dont believe is safe on hard surface unless you can disengage....Ive witnessed one flipped and know of 2 others... Lloyd Lloyd J. Lounsbury ... ...
Ekhardt Schultz in Canada was working on VW conversions and would know if you could find him in the Toronto area somewhere??? I believe his wife passed away...
Make sure its not coming from the seal on the oil return tube....If the cylinders are taken off and back on the rubber seal doesnt want to work good a 2nd...
Put this in Google - uralroikka, vw (make sure you ignore the "Do you mean..." thingy) then open Uusi sivu 1 <http://www.uralroikka.net/vw.html> - should get...
