Try Hasting Rings online. They have all ring sizes...K Sarah Boyd <srsboyd@...> wrote: Do you have any idea were I ould get a set from. Thanks for the...
Ray, I have those as well. Judson ... We lost Jamie Christanson to Asthma too for those who never had the pleasure he was a Dneprhead who sold our founder his...
Any chance we can get a bigger photo of that? Cool picture. thanks, Curt John Willcox <af14th-5@...> wrote: SPONSORED LINKS Dnepr Motorcycle Cossack...
I'll send you a higher quality copy, Curt. Unfortunately it's a scan of a home made postcard, pretty rough. Captures the spirit though, doesn't it! John...
I've read about and seen Russian and Chang bikes with BMW motors, but has anyone ever put a Russian or Chang engine and drive train in a BMW/2 frame? John...
... I don't know that anyone has done it, but it is a bolt in swap for ANY commie motor. You can't use the commie transmissions because the driveshaft rotates...
Not sure what you are talking about - the Dnepr tranny works fine with my BMW 750CC engine - not reversed or anything other than miss-matched boltdown holes...
My reason for asking was mostly curiosity. I have a /2 conversion "project" that I've been working on and it's quickly becoming a money pit. A used /2 motor...
... John, The BMW and commie motors turn in the same direction. The BMW transmission is a three shaft(input, layshaft, output)transmission, the commie...
One of my customers bought an M-72 engine from me to put in an R-12 frame. From his description the frame had already been "messed with" but I do not know to...
Is there an easy way to tell what size Dnepr 650cc engine you have? Lloyd shared with me recently that one way to tell is that the 7.0:1 high compression...
Jamie Christensen was a dear friend of mine. He is the one who found me my military Dnepr and gave me the lessons on how to ride so I could get my bike...
I see what you mean, Weav. I always thought they were the other way around. It's OK though because that straight top bar on the rear frame is butt-ugly! I...
I think what you mean is what compression engine do you have, low or high. A 650 is a 650, low or high compression. That said, you could do a compression test...
Hello dneprheads, http://photo.rol.ru/showphoto.php?photo=104317 there are not outside different between MT10 and MT10-36. books wrote : MT10 have 32 hp...
I just read recently that the motor to transmission is a direct bolt up (Can't vouch for the motor mounts, though). Everything else, EXCEPT the /2 tranny turns...
Jamie was the source of Dnepr parts I found when I first needed parts. He always threw in a few extra bits, and this was the first interaction I'd had with ...
/2 engine BOLTS DIRECTLY up to a Russian reverse transmission. I have one sitting in my garage right now. There is a clutch rod check / length adjustment that...
K-301's bolt right up to the /2 engine as well. Judson Gary Pell <gspell68@...> wrote: I just read recently that the motor to transmission is a direct...
Do you have the flat top pistons or the domed top? You can see examples of the flat top all over the ebay stores. You will rarely ever see a domed. The flat...
I put a K-750 tank on a Ural M-67, if I remember correctly the 2 front brackets have to be moved, other than that it went right on and looked great. Bob ... an...
