Hello Mel, I'm always learning something new from you guys. I did not know about the roller bearing, I put new BB's in one of my 90's last year. Any changes to...
From what , Tony ? . the old bikes and junk I've owned ? . Looking forward to March Tech Session a great deal ! . -Nate ... it ... he ... he ... killer ... ...
Yes Joe , you must remove and replace the bearing races . -Nate Joe Asked : Re: questions on front fork bearings Hello Mel, I'm always learning something new...
Adam, on all the US market CT's, the tail light is the brown wire. Mel - Yorba LInda, CA ... and ... the ... always ... stubborn ... through ... the...
Hi ! . You know how it is with old mechanics , I've been off in my beloved junkyards , that and working on old Mercedes Diesels , riding and tinkering my Ural...
Joe, it's just a simple swap out. You drive out the old races with a screwdriver or punch and then tap in the new bearings. Mel - Yorba Linda, CA ... not know...
Pretty well all things considered. Work has been steady for the as 9 months or so, after being off for four months, So that's good. Picked up a fixer upper...
Started working on the newly purchased 77 CT90 today and found a couple of surprises. The carb was off the bike when I bought it and found it's very corroded...
I cleaned my tank with phosphoric acid and then coated it with this stuff. http://www.por15.com/ Probably similar to some of the other things out there. I...
So Wayne, do you spend the rest of your time on Spiritburner.com? I picked up a Svea 123 and an Primus 100 as an out growth of my Coleman lantern/stove...
Vintage back packing stoves? Who would have ever guessed? I have two old Colman back packing stoves. These are the round ones that are just slightly smaller...
Another happy por15 customer here. I bought the kit and it worked great. Just put a new carb on from dratv.com and it also works great other than when the...
Mike, Just happen to be a Coleman crazy myself, stoves and lanterns. Terry ____________________________________________________________________________________...
OneG - How do I fix a sticky float? Mel - Thanks, I'll look into all three of those. I've tried the drain screw at the bottom of the carb, and it goes from...
... From: vwnate1 To: ct90@yahoogroups.com Sent: Saturday, March 01, 2008 8:02 AM Subject: [CT90] Re: Carburetor setting From what , Tony ? . the old bikes and...
One more Happy POR 15 customer here also. Used the kit last week and it looks great inside the tank, alot of rust. Off this subject, but does anyone in the...
Yes, I am also a fan of the POR 15 kit. I recommend the whole kit-about 35 bucks but worth it! Can anyone help with suggestions as to how/where to find the...
The whole kit is definitely the way to go. I just went with the coating because My tank wasn't that bad and you get a quart of it for $45. I already had the...
I recently replaced an exploded clutch in my 74 CT90 with a used one, or at least I attempted to. Upon reassembly I discovered that I was missing the 'oil...
Some folks like to use a glob of grease and report having great success that way. My self, I prefer to find either a crate or cardboard box and lay the bike...
Kenny, I used the grease as the first reply suggested, but i guess I don't understand what you mean by seating it. And maybe something on my bike isn't...
John The outer bearing on the clutch is where the clutch plate cam slips into. Once that is in the oil guide is next it should also slip into the clutch cam...
John: Don't forget to unscrew your adjustment screw on the outside cover so you have lots of slack. You want it to bottom out on the outter housing. As you...
