--Neal, all my experience is with aircraft engines. You want either the rings OR the cylinder to be soft gray iron. For example, chrome rings would require a...
I found out today I have to be in Nevada for a conference for work the same weekend as tech day. (9th-11th). I'm really bummed. Besides the obvious that tech...
Plasti-Kote FM8128 with great results. Do a seach of messages using rattle can as the key word and you will see my othe post on where ot buy it Bobin...
Hey, all - It's been awhile. I've been without computer since I graduated school, and my email addresses both tanked. The good news is my CT90 is running...
Hi Red, Could be alot of things. Go through the whole tune-up routine. Check point gap, spark plug gap, timing, and valve tappet clearance. Also check voltage...
I have a reflector on a seperate bracket thats bolted to th back of the tailight housing and protrodues over the tail light is this unusual I dont remember...
This has been bugging me for a long time. Why does the CT90 have a black cast iron lower half on the cylinder, and the engine on the street ST90/Sport 90s were...
Just a guess, but I'd say it has something to do with the high RPM (HIGH HEAT)and low speed (LIMITED COOLING) when the CT's are off-road. The street 90's have...
I agree. Could also be bad emulsion tube O-Ring. Keith in AZ ... From: kenny martin To: ct90@yahoogroups.com Sent: Thursday, March 01, 2007 7:07 PM Subject:...
Where the K0's suppose to have an o-ring? Travis 68 CT90 Pisgah National Forest, NC ... From: ct90@yahoogroups.com [mailto:ct90@yahoogroups.com]On Behalf Of...
Travis, K0's and ALL CT's 1978 and newer, have neither o-rings nor bleeder holes in the emulsion tubes. The only carbs with bleeder holes in the emulsion tubes...
reply. I wonder if all the 74s had the reflector ans if other years used it as well. Just curious Bob--- In ct90@yahoogroups.com, kenny ... to th back of the ...
Some of you are experiancing severe snow storms, and I know that many of you live in the areas that were just recently hit with those deadly tornadoes and wind...
Oh , O.K. ~ twist my arm & make me go to my -favorite- pastrami place " Hi Life Burger " on So. Fair Oaks in So. Pasadena instead..... =8-) Ride to Pasadena ,...
I just picked up a CT with that reflector on it. I think the production date was 11/71 but I would have to check tonight to cofirm that. Here are some pics...
Once you have the clutch pack off and in your hand , lay it on a w i d e old beach towel so when you take it apart you can lay the parts out in thier correct...
Tony ; Best way : take the M.S.F. Moto Safety Course over two weekends , then you don't need to do the riding portion of the DMV license test (sweet , eh ?)...
