I had to replace my charcoal canister to fix that problem when i got it, but first i also checked for all the cracks and what not along the lines...hope that...
Hey All Looking for four or five 16x8 5 on 4.5 rims for a cherokee. Four must match spare doesn't have to. Style doesn't matter the cheaper the better, don't...
Fred, didn't you have some vents for sale a while back? I've been here in southeast AZ for just over a year now and the underhood temperatures have been too...
Just traded my YJ for a '92 XJ, 6"coils/2"spacers, 35's, Lockright rear, 4.0 HO , Beefed front suspension. Thought I would say hello. I live in Denver....
Not this Fred, as far as hood vents go. You can buy a kit to backflush your cooliing system. It's only a few bucks, and it does what you describe. Probably...
Hey Mike; I used a set of vents off of a Chrysler Lebaron Turbo. They worked out great and look very tuff. I paid twenty bucks at the local junk yard. Ron ...
I knew they were off some Chrysler but didn't know what model, Thanks Ron ... low ... __________________________________________________ Do You Yahoo!? Tired...
Just came across the group and decided to check it out. anyone know if there is an XJ club in grand junction? Just for info my rig is an 87XJ/ 4.5 RE lift/...
There are a few NAXJA members that live in the vicinity. Next year the summer wheeling trip in Colorado will be based at Ridgeway state park most likely. Fred...
All for these item would work on a cherokee. It would make one cherokee owner happy. Inline 6 4.0 Motor-$1000 out of a 89 cherokee This motor was cleaned and...
Haven't been out here on the site in a couple of years, but I wanted to make sure the 4X4 community was aware of a USFS draft plan on travel use in the White...
i was replacing my shocks and i broke one bolt from wach side of the rear shocks. then i broke off an "easy out" in one of the holes, the other i couldnt get a...
Sounds familiar. What I did: I took a piece of 2X2 1/8 angle about 3" long and made two shock mounts, then I bolted the new shock mounts to the rear K member ...
check out projectxj.com, and look at the "other rigs " page, I think ther is some in there. John ramsteinsux04 <ramsteinsux04@...> wrote: Dose anyone...
Hey guys as you know my jeep is being parted out but now I'm looking for a DD. A 90 or newer inline six doesn't have to run I ahve a solid motor but would like...
No experience, but they sell a rear bumper that I am very tempted to buy. They advertise on NAXJA, I suspect that one of the principals is a member. I've never...
Hey Scott, we were looking for trail that weren't snowed in and just got back from an all day jeep tour of Moody and Crystal Mountain and are planning on a...
any chance you could send me some pictures of what you did. I dont have a welder nor do i know how to weld, im getting to the point where im going to take my...
I never took pix. You just need a drill and a 4.5" side grinder. You make 2 brackets, each 3" long. Cut out a space for the top of the shock to set into, set...
I am coming late into this project and I am being asked for my input. However, I don't have any experience with Renix FI systems. The project in question is a...
In a message dated 9/24/2006 12:38:29 P.M. Mountain Standard Time, wb9yzu@... writes: I am coming late into this project and I am being asked for my...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
