Hello Cadillac Chat Club members, My Great Cadillac Links & stuff http://cadillac.no-ip.org/ Grab your FREE Cadillac Calender @...
classiccadillacchat@y...
May 1, 2006 7:55 am
17285
Hi group, my 72 Eldorado has locked on front brakes. i thought i needed to rebuild the calipers. in pulling the right front off, after prying and beating on it...
Craig
miura@...
May 1, 2006 10:47 pm
17286
Cool Ebay Cadillacs FREE antiVirus , firewalls ,Spyware removers,Messengers ETC http://groups.msn.com/196364CadillacCommunity/computerhelp.msnw THESE ARE FOR...
Craig, Before looking at anything else,make sure your flexable hose to the calipher is servicable. Internal collaspe of these hoses are quite common,thus not...
I would bet that the master cylinder is not returning to the idle/home/rest position. Is there something that is keeping the brake pedal from coming all the...
Probly either proportioning or metering or combo valve is gummed up with something, probly rust particles which naturally accumulate there. ... Ronald L....
I need an idler arm for a 72 deville Moog part does not clear the chassis. Neither does the rare parts one. The one that the dealer thought it might be was...
thanks for ideas, With an open right front brake hose going into a glass jar, i fired up the engine and pressed many times on the brakes with a full...
by the way, i ordered some speedbleeders from a similar named website. 3/8 x 24 front, 5/16 x 24 rear. i have never used them, thought i would give them a try....
Hi group, i am thinking of brakes at the moment so i have a one track mind. for some reason i must have fallen asleep the past 30 years during brake...
Hi Ron, thanks, i think you are right, i think it is the combo valve. i am not sure it is gummed up, it seems to have triggered and the front brakes are locked...
... Jim, Check the ground at the blower. It is the stud (spade connection) on the blower housing. Check the mount screws to see if they have not backed off and...
Probably good if you are working alone. It eliminates the need for a second person to pump brake pedal. Mel ... From: classiccadillacchat@yahoogroups.com ...
Almost certainly the brake HOSE, but I would replace the caliper too as advised. This is very common with the hoses. If you only do one, I would advise the...
1. Where are the horns supposed to be? I can't seem to find them to repair them (Maybe that's why they don't work, they're missing) 2. The vacuum line that...
AGAIN! If the master cylinder is not returning to it's idle position then the piston inside would not clear the fluid hole in the bottom of the reservoir, and...
Hi All Well, we loved our '58 sedan so much we just got another one :-) This time we decided to get a runner rather than go through the rebuild process. She'll...
Alasdair - Good Luck with your latest purchase! Would love to see the pictures when posted. Jon ... rebuild ... recovered but ... very ... ready ... white ......
I put a 44 dollar alarm on my car on monday and i have been very happy with it. It is fairly basic and works great. The alarm was bought at Wal-Mart. It was a...
Originally, I hadn't changed my brake fluid at all, just added a little each time it needed it. My first rebuild of my '59s brake system started due to a...
Cool Ebay Cadillacs *********Getting a BOUNCE message on the main page ********** ******or when you try to post messages?****** Reactivate your account @...
Giant Fin growing in Mount St. Helens' crater Friday, May 5, 2006; Posted: 9:12 a.m. EDT (13:12 GMT) 2b8e0a5.jpg A USGS photo shows a helicopter near a rock...
The last can I had was an aerosol that contained a grease similar to lithium grease although the viscosity (thickness) seemed lower. It was recommended for...
I have owned a lot of cars and have only once changed brake fluid. It was on a 1961 Econoline pickup that had sat parked for twelve years. I replaced the...
