Hello list, I could really use some advice from you Chrysler fans. I have a C22 that I sail on the Black Sea, in Romania. I am now looking for a decent...
Hello fellow chrysler 22 owners, I have a problem with lowering the mast, when the mast is almost all the way down, it hits the cabin top, I have a makeshift...
My boat has a mast crutch at the stern for the mast to rest on when trailering. It fits into two round fittings on the transom when in use and would keep the...
James Laurence
laurence5@...
Jun 4, 2004 4:12 am
1092
BOB- THIS MIGHT HELP YOU .IM SENDING A PICTURE WHEN MY MAST IS DOWN AND READY FOR TRAVEL. RAY THEIR ARE THREE KINDS OF PEOPLE IN THE WORLD!!!!!! 1-THOSE THAT...
Ray - Your boat sure looks nice and white! How do you get it so clean??? ... From: ray nadeau To: chryslerc22@yahoogroups.com Sent: Friday, June 04, 2004 6:33...
Bob - Do you have a bow pulpit and a roller on the stern rail? The standard mast carrier has a roller, which is lower than the stern rail, but a roller was...
Yes I have a bow pulpit, the trouble is, when I lower the mast, the fitting that the boom connects to, presses real hard on the top of the cabin, if I didn't...
Please respond to tlhokc@... The cable broke on my 1979 Chrysler 26 swing keel. I have no trailer, but can borrow one from a similar boat. Problem is, on...
pwh4osu
pwh4osu@...
Jun 7, 2004 5:18 pm
1097
Done this last year. You have two choices: Crane or snorkel. Option two is much cheaper. that what I did. First problem is to get the keel up. You can do that...
Henry J. Jakl
HJakl@...
Jun 7, 2004 5:47 pm
1098
Bob, My c 22 has a bow and stern pulpit too. My stern pulpit has a round black roller in the center over the rudder/tiller. This rubber roller is similar to...
sorry did not read the whole mail. You most likely taking the water thru guide for the wire, it is not sealed and when boat is moving its creating the pressure...
Henry J. Jakl
HJakl@...
Jun 7, 2004 5:54 pm
1100
There is one of the link: http://www.cashflowfactory.com/keelrepair/index.html Henry J. Jakl Projects department HTH HEATECH INC. 8916-44 Street S.E. Calgary,...
Henry J. Jakl
HJakl@...
Jun 7, 2004 6:00 pm
1101
Patrick, Hi - my name is Rik Sneeuwjagt, and I created and manage the Chrysler Sailing Association website located @ http://chryslersailing.lizards.net. I am...
RIK SNEEUWJAGT
sneeuwjr@...
Jun 7, 2004 7:34 pm
1102
Hi Patrick, You are correct to be concerned about anything being damaged when the keel dropped. Most likely area of damage is the back of the swing keel...
bob - well i clean it with comet cleanser then i wax it with a good marine wax for the season. it dose come out of the water with scum on the bottom after 4...
A prior owner apparently lost/broke the cable while the keel was in a raised condition. When the cable broke, it put a 3" hole in the front of the keel trunk....
Hey everyone, I am getting ready to sell my C22 with a trailer. The trouble is when I pulled it out of the water onto the trailer the rudder bottomed out and...
SUSAN- TRY THIS SITE FOR THE CHRYSLER MANUEL-IT HAS IT ALL http://chryslersailing.lizards.net/chryslersailing/sail_c22.html THEIR ARE THREE KINDS OF PEOPLE IN...
Yes those are great pictures. I haven't found any pictures of the entire assembly on a boat though to see what the whole thing really looks like. (I've only...
will try to susan THEIR ARE THREE KINDS OF PEOPLE IN THE WORLD!!!!!! 1-THOSE THAT MAKE THINGS HAPPEN!! 2-THOSE WHO WATCH THINGS HAPPEN!! 3-AND THOSE THAT SAY...
What is the rudder made of on a swing rudder assembly? Wood? Fiberglass? Has anyone ever bought one? I've got a lead on the bracket at Long Level Marina. Is...
Susan: Do you mean the rudder itself? I bought a new rudder from IdaSailor Marine http://www.idasailor.com/catalog/default.php Talk to Joel Santarone....
James Laurence
laurence5@...
Jun 12, 2004 1:11 am
1111
Susan: There are a couple of photos of the rudder at the Chrysler Association site http://www.chryslersailing.lizards.net/chryslersailing/ Under Photos there...
James Laurence
laurence5@...
Jun 12, 2004 1:35 am
1112
I've taken the liberty of adding pictures of the rudder assembly on my boat to the file for my boat. So just look under C-22 (No Name Yet) and you'll be able...
I cut mine open a year or so ago to drain water and check foam. It is a solid urethane foam core woth glass over it. ... From: Mark Tassone...
Peabody, Bruce V.
BPeabody@...
Jun 12, 2004 7:35 pm
1114
I need to replace my mast and rigging on my C22, it was torn off by a crane while on it's trailer. Even tore off a couple of chainplates. Is there a place...
These folks are in New England but they might be able to help you http://www.dwyermast.com/ Also IdaSailor Marine...
James Laurence
laurence5@...
Jun 12, 2004 10:39 pm
1116
Hi, Is there anyone out there with a fixed keel C-22? How is the keel attatched to the hull? I have a swing keel converted to fixed keel (previous owner) and...
I've got a c-22 with a fixed keel, but unfortunately I'm not qutie clear on how its attached myself. I know there are 2 (maybe even 3) pipe brakets that attach...
I'll ask the guy who cleaned mine before I sold it. I don't know if it was original or converted. If he has an underwater camera I'll ask him to take a pic...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
