lmao ... ____________________________________________________________________________________ Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see...
AJ, Fiero covers are worth the effort. Easiest to retap the holes to 1/4-20 and use studs w/ holddowns and/or the original bolts depending on intake used. The...
Thanks Dwayne, I have all the original Fiero studs so that isn't a problem. I have been stocking up on Fiero oil caps and have 3 extra. You would think that...
Caps and gromets are all available at http://www.secureleadercom.com/fsstore/default.asp? bodystyle=1&topdeptnumber=193&searchBit=3&dept=10 Fierostore.com...
Ok, guys, heres that first question for ya. This '81 X-11 seems to have an unusual steering problem that I have never run into before. The assist works all the...
Hey guys, A while ago I asked about a problem I had with the 3.1MPFI blowing smoke out the exhaust and shooting water out the tail pipe, a rough idle and power...
Little update, Coil packs I pulled off 2 wires at a time and started the car, and they were arching with good blue spark.. *shrugs* i dont know ... ...
Check your vacuum. It sounds to me like your intake manifold gaskets might be leaking... Cam ... From: Edward Reighn To: chevycitationsforever@yahoogroups.com...
Hey Cam, I did check for vac leaks.. none are showing, tried both ways by tracing and then by spraying the carb cleaner around it.. nothing. Like I said its ...
I had the same problem with my 2.8. Turned out to be a cracked head. Looked like a carbon track between spark plug and exhaust valve. Dennis ... Got a little...
Hey guys this is chris, and i have a couple of questions about A/C, i want to get the A/C working on my 85 2.8 Citation, now i wasn't working at all, like when...
Yeah I was thinking head gasket too Milt especially when I saw white smoke and water out of my tail pipe. So I checked the usual things and this is what I came...
Mike Massey stopped by today to drop off his really nice 1981 X/11. I am swapping out his 4-speed manual for the 5-speed Muncie/Getrag. Mike bought a really...
Problem with converting is not thinner oil but the PAG oil in 134 and the MINERAL oil in r-12 are NOT compatible with each-other. Actually, when mixed, they...
Yep. Common to Citations. We lovingly call it Morning Sickness. You will be VERY hard pressed to find a replacement 81 X-11 specific steering rack. You can...
Isn't anyone interested in Marc's X-11? Less than 40,000 original miles. MPFI 2.8 V-6. Currently has hi-po th125 tranny in it but original (hardly even...
Hey Dennis, I ran a compression check on the engine and it was in the good range.. The internals on the engine are fine I believe because if you bump the gas...
Sure, but if the leak is internal you won't find it that way. Try putting a Vac guage on it and take it for a spin. You might find it has a vacuum leak...
The R-12 compressor will work just fine, you need to add about 6oz of Ester oil 100 to blend the R-12 oil. If you do not add the Ester oil, it will not burn up...
Jason, buddy, I have to disagree with you on R134a not working worth a crap. I have done a ton of conversions and have never had any cooling problems. Ester...
Sounds like your rack is pooping out. I am afraid that you will not be able to find another 80-81 X-11 rack. If you can't find someone to rebuild yours, you...
same here on that one...I used to work as an Express Tech in a Honda Dealership..and we converted R-12 to R-134a all the time...I even converted my old Civic...
not only that, but the ciera GT springs are much stiffer in the rear, and Ive always thought the x-11 springs sucked in the rear... ... list said that the GT...
I know man. Had a few arguments about this. I'm not gettin into it again but 134 requires a larger condenser to work well which is why most 12 to 134...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
