... listen and look for the trouble.It would be a hell of a ride but Ive been on worse like sitting on my engine with hood up pouring gas in carb with randy...
I went and Saw Dallas down at Denver spring a few days after Moab. The little springs on the bottom of the pack kept moving and rubbing my tire, he said it was...
You can replace the centering pins without removing the leaf spring. I just did it on the rear of my J20 on Thursday, it wasn't very difficult. Denver Spring...
All kidding aside. Would it be too dangerous to put it up on jacks and drive it just to see if I can get a better feel for where the noise is coming from? Has...
I have BJ's 6" springs on the J20 and I havent seen that problem. Although it really hasn't even seen the pavement yet. I did notice when I took the shims out...
Scott, Did you put the shims back in? I've thought about leaving out the shims, it doesn't look like it would make that much of a difference. matt ... Moab. ...
I've done it. just be careful, make sure there is nothing in front of you in case you hop off the stands you don't want to run into anything, put the stands...
No I didn't. The J20 is so long that with the shims in, the rear axle pinion angle was almost in a straight line while the angle on the TC end was alot more. I...
Hari, I havent discounted it by any means but I have replaced both the engine and the tranny in this thing and the noise is exactly the same as before. I...
Do not forward virus warnings of any kind to CFSJA. Most of the time they are HOAXES. Even if they aren't, do not forward warnings to the list. If you want to...
cfsja@yahoogroups.com
Jun 1, 2006 6:13 pm
60587
CFSJA Emailing List What, Rules, Who, Tips Updated 4/14/2003 ** Please SAVE THIS MESSAGE somewhere after you READ IT ** SUPPORT OUR TROOPS * Join 4-Wheelers...
cfsja@yahoogroups.com
Jun 1, 2006 6:13 pm
60588
When I did my SOA I swapped one of my pins in the truck but the other one wouldn't come out so I took it out and cut off the pin and sepperated the leafs to...
As long as you use quality jack stands, and tall enough ones so you don't have to extend them very far, and you don't put anything under the jackstands (wood...
Ok, for the sake of keeping me and my family sane I am selling the truck. Posting here first because I would like it to stay in the group. If not then I will...
Scott, Just to let you know I wasnt making fun of you by my comment,I wouldnt do that to you. In all truth I wasnt kidding. A mechanic friend of mine had a...
I'm sorry too...too rich for my blood right now. I'm scrping enough to start on my 401...figured I'd do it right the first time and not worry about it later....
Ethan, some of us lurk! (have been doing so since a week after this list was started back in 1998 ;) Seriously though, now that the diesel CJ is complete my...
I'm with Hari on the lurking part.Still tearing apart 76 and 74 cherokees and building a 79 cherokee s. new 4.56 gears newly rebuilt q trac and misc. other...
Gurgle Burp... Waaz haapaaneeen! Watchin TV, playin bass guitar, and once a day goin through about 450 emails a day, of which about 20 are CFSJA (on average)...
So, what kind of bass? I miss my old G&L. Been thinking of getting another and torturing the neighbors. Rande ... From: "Roy C. Sigsbey" " Gurgle Burp... Waaz...
I would be tempted to swap QTs with the Wag to see if the problem moves. And since Ethan is bringing it up... Scott, have you dropped the diff covers for...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
