Thanks for the info I had been getting from this site Iam currently building a 1988 Mustang GT Convert 302 .60 over weldand Ecellartor manifold, stock head...
bring on the questions!! and welcome!! ... From: trafficlightchris To: carbedMustang@yahoogroups.com Sent: Saturday, January 06, 2007 8:54 PM Subject: [cM]...
Hello everyone. Hope that you are doing well in this new year. I have a question on identifying a component. I removed the power valve from the carb I...
Anderson, Richard
randerson@...
Jan 8, 2007 4:38 pm
32104
it should be stamped on the gold circle. they are sometimes very hard to see. i will try to send a pic. if it dont work, i will e-mail you one, good luck, mike...
Thanks Mike. I think I will take a crayon from one of my kids and go over the gold surface area to make any stampings more visible. I thought I saw something...
Anderson, Richard
randerson@...
Jan 8, 2007 5:24 pm
32106
FYI the list can not accept attachments thus you can send pic to the list. :( Would be so helpful in these situations. Unfortunately we have to work with what...
Use a torque strap. Solid motor mounts are a pain. I run roughly 750 HP and still have the stock mounts with a torque strap from the head to the frame rail....
I used a crayon last night on the power valve so that I migh actually have a chance to see what was stamped on it. Purple Mountain Majesty is a great contrast...
Anderson, Richard
randerson@...
Jan 9, 2007 3:33 pm
32112
yup!! ... From: Anderson, Richard To: carbedMustang@yahoogroups.com Sent: Tuesday, January 09, 2007 10:21 AM Subject: RE: [cM] Power Valve Help I used a crayon...
hi guys interestin in buying a 66 mustang. drop me a line.... asking price $5,500 ... Wade Pittman swpittman1@... "keep thy airspeed up, for the ground...
You can't pull thru the existing in-tank pump, I tried it! What I did was replace the in-tank pump with a low pressure delivery pump from a F-350 truck saddle...
dbirdsall@...
Jan 9, 2007 9:08 pm
32115
... did ... from a ... left ... if ... pump,,& 1' pc. of rubber line.. splice onto line(where pump was) hardest part is droping tank,pull out sening unit/pump....
make sure it's good. if it leaks you get extra fuel at high vaccuum/low load, rich. mytyvac has a gauge so you learn two things, the pv holds vaccuum and...
Pevonomo@...
Jan 25, 2007 2:17 am
32117
You'll want the mytyvac sooner or later to check idle vaccuum. If it pulls 12 or more inches at idle you're pretty good and that means you have a really...
Pevonomo@...
Jan 25, 2007 2:44 am
32118
Ok so what do you guys think of these, since the motor is out I decided to redo the hole front end over I will be posting photos soon...
Chris you can not post attachments to the list. If you want to post any photo's you will need to use the photo's section at the Carbedmustang yahoo group main ...
So, I have a King Cobra in the 84 behind the mild 5.0 liter. The King Cobra clutch has ~100K miles. Last few mornings to work, it has felt "funny" a few times....
Ralph if you want to save a few bucks I have an adjustable cable and triple hook quadrant here I will let go cheap. I thought I had snapped or streached the ...
hey guys, I have just bought an 84 LX coupe. I want to throw in a 351W with a T5 behind it. But I am really stupefied by carbs, being an EFI guy. Plus what...
Andres, There's a lot of stuff that will fit the older cars even if it's advertised for newer. Your drivetrain isn't that big of a deal. I have an 80 coupe...
The 86 up stuff works fine, it was just a factory change in the exast. For the 351 w the choices are a little limeted and expensive but imho well worth the...
Hey all, Anyone interested in an 84 stang t tops coupe? Ill write more latter. Anyway im about to go through a nasty divorce and will need to get an apartment...
Let know if you going to part it out, I hope that you can sell it whole _____ From: carbedMustang@yahoogroups.com [mailto:carbedMustang@yahoogroups.com] On...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
