I have just about figured everything out for the carb on my 302. I am
junking the original throttle cable and running a nice Lokar universal.
It will be...
Anderson, Richard
randerson@...
Dec 1, 2006 7:01 pm
32090
That is to funny. I was looking into replacing the stock throttle cable with a Lokar. Jeg's site showed an error, what was the cable model number. I was not to...
When I set up a new cable I have used a piece of 1/8 x 2 steel piece and bent it, drilled the mount holes to mount on the manifold and a hole for the slot then...
66 original 6 cylinder. Has 83-85 5.0 with AOD. Has lokar linkage with new 600 holley not the cheap one. Edlebrock torker 289 intake and MSD e-curve...
The software is doing some word wrap tricks. The linkage I am looking
at is:
<http://www.jegs.com/webapp/wcs/stores/servlet/categoryitem_10001_1000>...
Anderson, Richard
randerson@...
Dec 4, 2006 2:13 pm
32094
Just in case any of you have the same problem with big long links just go to www.tinyurl.com and submit it to them. It will then create you a nice short...
Thank you.
Try this
http://tinyurl.com/ymvvnc
So what does everyone think of that setup?
________________________________
From:...
Anderson, Richard
randerson@...
Dec 6, 2006 1:53 pm
32096
Hey all, I have a new holly dp 650 and havent ran the car yet as im doing some engine work but What jets are some of you using with a 306,stock gt40p,weiland...
Matt that combo isn't too far off what I ran in my old 83 GT. Biggest difference was I ran a vic jr. Even with the vic jr I didn't have to jet down much. IIRC...
We have had several new members join in the last few weeks. I know the list has been slow so I just wanted to send a note to the list thanking the new members...
Note: forwarded message attached. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection...
Thanks for the info I had been getting from this site Iam currently building a 1988 Mustang GT Convert 302 .60 over weldand Ecellartor manifold, stock head...
bring on the questions!! and welcome!! ... From: trafficlightchris To: carbedMustang@yahoogroups.com Sent: Saturday, January 06, 2007 8:54 PM Subject: [cM]...
Hello everyone. Hope that you are doing well in this new year. I have a question on identifying a component. I removed the power valve from the carb I...
Anderson, Richard
randerson@...
Jan 8, 2007 4:38 pm
32104
it should be stamped on the gold circle. they are sometimes very hard to see. i will try to send a pic. if it dont work, i will e-mail you one, good luck, mike...
Thanks Mike. I think I will take a crayon from one of my kids and go over the gold surface area to make any stampings more visible. I thought I saw something...
Anderson, Richard
randerson@...
Jan 8, 2007 5:24 pm
32106
FYI the list can not accept attachments thus you can send pic to the list. :( Would be so helpful in these situations. Unfortunately we have to work with what...
Use a torque strap. Solid motor mounts are a pain. I run roughly 750 HP and still have the stock mounts with a torque strap from the head to the frame rail....
I used a crayon last night on the power valve so that I migh actually have a chance to see what was stamped on it. Purple Mountain Majesty is a great contrast...
Anderson, Richard
randerson@...
Jan 9, 2007 3:33 pm
32112
yup!! ... From: Anderson, Richard To: carbedMustang@yahoogroups.com Sent: Tuesday, January 09, 2007 10:21 AM Subject: RE: [cM] Power Valve Help I used a crayon...
hi guys interestin in buying a 66 mustang. drop me a line.... asking price $5,500 ... Wade Pittman swpittman1@... "keep thy airspeed up, for the ground...
You can't pull thru the existing in-tank pump, I tried it! What I did was replace the in-tank pump with a low pressure delivery pump from a F-350 truck saddle...
dbirdsall@...
Jan 9, 2007 9:08 pm
32115
... did ... from a ... left ... if ... pump,,& 1' pc. of rubber line.. splice onto line(where pump was) hardest part is droping tank,pull out sening unit/pump....
make sure it's good. if it leaks you get extra fuel at high vaccuum/low load, rich. mytyvac has a gauge so you learn two things, the pv holds vaccuum and...
Pevonomo@...
Jan 25, 2007 2:17 am
32117
You'll want the mytyvac sooner or later to check idle vaccuum. If it pulls 12 or more inches at idle you're pretty good and that means you have a really...
Pevonomo@...
Jan 25, 2007 2:44 am
32118
Ok so what do you guys think of these, since the motor is out I decided to redo the hole front end over I will be posting photos soon...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
