Has anyone ever seen a fox with cragar ss rims? Im having trouble finding some that will fit. I have a 5 lug setup im about to put on just so I could use these...
I recently converted my 84 CFI Mustang to a carb set up. (Holley 600 with a Profesional Products Typhoon Intake) I got a little bit agressive and chopped the...
I did the same thing on a '85 and couldn't get the tach to work even when I ran a wire from the MSD 6a connection to the dash tach. I put a set of Autometer...
might look through these to see if they have what you need.. if not, I have the shop manuals and can look it up.. MSD MIGHT need a tach adapter to work, pretty...
Thanks. I will start trying to sort it out. ... ForwardPage=/az/cds/en_us/0900823d/80/16/71/3c/0900823d8016713c.jsp ... (Holley 600 ... wire I ... the ... I...
All, I am looking for ideas. My freshly built '86 roller block 5.0 is having some cooling issues. The combo is basically a stock block honed with TRW forged...
I have a Holley 650dp and the secondaries won't open fully. I put a bend in the linkage arm and it helped a little bit, but if I bend it any more than it...
How is the radiator? Is it stock and are the passages clogged? Ron ... From: Carl Poleschner To: carbedMustang@yahoogroups.com Sent: Wednesday, August 17, 2005...
... I doubt a clogged stock radiator would cause a pressure problem. A flow problem yes but not a pressure problem. For some reason I am thinking a 16lb cap...
No, the throttle will not open by hand or by the pedal. Jesse carbedMustang@yahoogroups.com wrote: There are 4 messages in this issue. Topics in this digest: ...
The stock cap is supposed to be 16lbs. THe radiator is almost new. My biggrest concern is that there is a lot of pressure on the rest of the cooling system....
Bad cap maybe?.. is the system totaly full? Matthew Southeastern AZ He that ruleth his spirit is greater than he that taketh a city. Solomon, ... Life is not...
Carl another thought hit me. In your description the way I understood it was that you had both the reverse rotation and standard rotation water pump on the car...
You might have hit on somehting. I will check this out. --- In carbedMustang@yahoogroups.com, John Stephenson <jdsgallops@y...> ... organization.--Bob Lutz...
Hey all I hope someone on here has info on this.. Im about to order a set of american racing torqe thrust 2's in 17x8 all the way around with kumho 255-45-17...
oh yea and the rim backspace is 5.00 I know it should be 5.5 but thats all thats avail from tirerack.com I called and talked to the guy.. ... Matthew ...
Just wondering if anybody knows what issues this project was in so I can order the back issues, or does anyone have them and want to get rid of them? THanks....
OMG I hadnt heard of that name in long time. I will check, but don't think I have those issues. ... From: butaford<mailto:butaford@...> To:...
REX MCLAREN
rex332@...
Aug 21, 2005 8:00 pm
31574
Yeah I know its old. I had an issue where they brouht it out of someones garage and swapped in a used roller motor and some other stuff. Just looking for...
... The first buildup of PPB was when I decided to modify the 84 (twin) instead of keep it original. I was looking at swapping the rear end because my 7.5 was...
I think you should be OK. I have 9's all the way around on my car and rub just a little bit. The 1/2 in difference should take care of any issues you have....
MM&FF from 89ish? I'll take a look. ... From: REX MCLAREN <rex332@...> To: carbedMustang@yahoogroups.com Sent: Sun, 21 Aug 2005 15:00:40 -0500 Subject:...
Pevonomo@...
Aug 22, 2005 7:56 pm
31578
How did you crack the block? Was that the stock 84 block? ... Matthew Southeastern AZ He that ruleth his spirit is greater than he that taketh a city. Solomon,...
... Yes, stock block. No power adds or anything. I blew a head gasket at 95,000. Replaced both. At 150K, I thought that another had blown. I had the heads ...
Ralf, Yea I remember when you put that new block in. Was right at the time I joined this group but I never knew what happend to the old one.. Hope nothing ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
