The only other difference in passing the inspection test was that they put a big fan (4' x 1')in front of the car when re-testing...... It seems like that may...
knowing the exhaust was high from failed test, they were probably either using fans to blow any exhaust gases out of the building, since most are heavier than...
I had the 3/4" drop blocks installed with the new performance spring in the front of my '85. When I bought it, it had 17" wheels on it, A totally SHOT front...
count on it....rubbing ans scraping. they will eat into the fender wells. the stock tire is so close that it touches sometimes on suspension travel. you're...
I have a set of 17x11 front's and 17x12 rear's manufactured by Complete Custom Wheel (CCW) of Daytona Beach, FL. Absolutely terrific wheels. I need another set...
Hey Brad, I just put on 275/40 R17 on the front on my 93 and 315/35 R17 on the back of the same car. The rims for the front are okay but I need to put on 11...
mid america has a good range of after market wheels, all sizes for all hubs...depending on chrome or the stock finish, they are not TOO bad...other than that,...
i just purchased ac/delco spark plug wires and noticed that all but one has 90 degree boots. The one has a straight boot. Does anyone know what cylinder the...
I'm trying to change the starter and I'm having trouble removing from the under the car. I don't have the car on ramps. I'm trying to do this with one hand,...
well, you're gonna have to get it up. jack it up, and remove the wheel and set it back on some blocks under the front frame rails where its solid and leaves...
I recently did this. The starter has to tilt down to get it out. It is VERY tight but will come out. That being said I don't see how you can do it without...
Lee, Were you having a bad day, or what was up? I've read a lot of your postings and know you want to help, and 99.9% of the time you do, which is a...
Wow! 2 change the starter with out having the car on ramps and with only the use of 1 hand! This has gotta be a tuffie! DW ... Yahoo! for Good Click here to...
Unless you are plastic man of the Fantastic 4....forget it! LOL Terry -- ... From: dw howle <dw_howle@...> To: c4corvette@yahoogroups.com Sent: Wed, 5...
I put original Delcos on my 87 and it made a world of difference, it gives me a good ride but not to soft. trwong2000 <trwong2000@...> wrote:I bought a...
Hey Brad, Not sure what u did to your car only because I deleted the mail. Started to read this letter and started to fall asleep, lol. Keep them a little...
brad, i'm just trying to warn you about this huge market that sells this show car stuff and takes thousands of your dolars and leaves you with a car that...
have you done the zr-1 brake kits or still stock c-4 brakes? the Z kits is a huge step up in stopping power...look for the pieces and see what you think...i...
Looks like I filled the radiator plastic reservoir too high and after returning home last night from a DE-stress drive I heard bubble n noises coming out of...
My 84 did this when the thermostat stuck shut. the steam from the low water in the engine caused the gurgling sound. I flushed and put in a 160 stat and all...
I put Kuhmo tires on my 84 and swear by them. I'd like to go to 17" wheels and bigger brakes one day, but that's a year or two away. Replacing the rubber...
Hey Bill and Lee, you guys hit the nail on the head with those comment and really thier is nothing else to say but to re confirm that. Tires, Bushings, Brakes...
John, Thanks, I hope the t-stat is not going out, I just replaced it last month during a water pump replacement. And the engine fan kicks on perfect at 225...
I had the starter and solenoid on the '84 changed ($55 labor). It starts now.. but time will tell. I will give update in about a week or so... thanks for...
Lee: Once again I compliment you on your knowledge and common sense approach to auto upgrades, maintenance and care! I have been a victim of ads, false claims...