Is there a torque sequence and torque amount to reattach the intake runners on an 87 L-98? I have books that tell me to reinstall in the reverse order I...
I still haven't changed the MAF because I found some more insight into my problem, and my money supply is low. I removed the electical connectors to my IAC...
hey, still working on it huh? me too. i gave up, and the same cash flow problem forced me to toss my MAF and insert a section of PVC tubing in its place. i...
Adam, all i have in my books is 8 to 18 ft lbs for the throttle body to plenum, and nothing for the runners. i always gently tighten the inside first, then...
Ok, well now I know how to put the runners back on, but how the hell do you take them off ??? I'm trying to replace my intake manifold gasket due to a pretty...
when removing the lower runner bolts (5) its always a challenge to access them all. it is often done with a 1/4" drive and u-joint with extensions and prayer....
Me and my crazy engine. I put all 5 lower bolts in from the same side they are one. Everything fit. Will there be a problem if I didn't run it in from the...
I went outside again and looked at a spare plenum I had - I attached 5 bolts from the outside but the hole you mentioned is indeed not used if I leave it the...
i think it wold live without the backside bolt as long as the gasket was new and wiped with some kind of gasket sealer. look at it and see if there is a bolt...
Does anyone know where I can get the T-top glass for my 84' corvette for a decent price? I am also looking for a black leather steering wheel? Any one have...
Seen some on ebay from time to time. Eklers has some in their catalog and so does mid america. Dwight ... From: "joecool2181" <JBugleB@...> Reply-To:...
I live in the uk and have a 1986 Corvette. The standard radio cassette is worn out. I would like to replace in with a CD player but if possible keep it...
there are many options here. the entire system MUST either be replaced with the exact same pieces (speakers, amps, tuner, tape) or all tossed and all...
About 7 years ago, I bought a single CD player for my 85 (which is now in my 87). I picked it up, new, at Carlisle. The nice thing about it was that it had...
Good Question... I tried to find a replacement for my Bose radio last year because i wanted a combination CDplayer/radio. I had an Alpine system in for 2 wks...
I recently sold a bose stereo on eBay for just 20$. There are enough out there, that they are not allways expensive. Perhaps a used bose gold with CD would...
Thanks for the the various solutions to my problem. In the uk you dont see many Corvettes. Many years ago I owned a 85 Transam which I enjoyed but then I sold...
Has any one replaced the Bose with an aftermarket stereo. What changes or problems did you encounter? Do you have to change the speakers? Any help you can give...
I replaced my Bose radio with Alpine top of the line radio/CD because Bose does not have an upgrade for their early system that only have a cassette/radio....
Group - I decided I am going to teach myself how to change the oil on my Corvette. I am very much a novice when it comes to actual repair on my car. I have...
One thing that I would recommend is to put a small amount of grease, or some oil on the oil filter gasket, this way next time you do your oil change, the...
Don't forget to lubricate the grease fittings __________________________________________________ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March...
... They have ramps with the extension pieces available as a kit. Check out http://www.tracyvette.com/autoramps.html sometime. Now you should be able to find...
you know, if you are determined to do it your self, the advise of the other members is all good and correct. but, i am seeing the benefit of having a...
Thank you all for your replies to my question from yesterday. Here is my new question: On the sides of the headliner of my convertible top, nearest to the side...