... Metzler Block C 3.50 for my /2... I just received my tires from Meyer, delivered to my door by US Mail, having been shipped on October 20 which is 12 days...
Some of you may remember I had problems with a slight, slow speed oscillation or wobble on my R27, at one point thought it was the old beer box I used to haul...
"scottyintex2002" <scottyintex2002@y...> wrote: << Some of you may remember I had problems with a slight, slow speed oscillation or wobble on my R27... Finally...
About 200 miles ago my odometer and trip meter quit working on my R27, but the needle still showed speed. So I pulled it apart last night found that the gear ...
The carb question. Now with the saved speedo funds I can work on the upgraded carb. Vech sells a better setup for about $400.00 if you buy everything, meaning ...
Another suggestion is to buy an "old" Honda Lead 250 carb and to make the adaptation required. A friend of mine did so and stated it was well working. And the...
Your biggest challenge will probably be to make/find a proper manifold. Esp. as you're talking about an R27, so you need to fit everything between the cylinder...
Steve Szelestey <sszelestey@y...> wrote: "... this dribbling monster of a carb has to go. I had my R27 carb rebuilt by Bing in 1999. The carb came with my...
... If you are not trying to hotrod the bike I would recommend a new Bing type 53. I upgraded with one of these and no longer have any flooding or idleing...
Hi, My R26 came with a Dellorto. No modifications to the intake spigot because it was connected by a rubber hose and still fit allowing the bellows hose...
Steve, where and when is the carb leaking? Maybe it just needs a few new parts, (needle, gaskets, etc.) My R69s carbs leaked profusely until I soaked them in...
Warning! doing it my way will screw-up the chrome ring! So if you have a nice show type bike delete this message before you get any bad ideas! So on with the...
Richard, Thanks for the offer but if you saw my R27 you would know that the speedo is least of my worries cosmetically! Technical is great except that carb....
short lived project that will require too much of everything. 1959 r26 i wanted to offer parts to the "community" before resorting to ebay. some stuff listed...
Dear mono-friends, A friend of mine, living in spain, who do not understand english, dutch or german is owning and restoring a 2WW - R35. He need a copy or a...
It appears I may be able to pull my R27 cylinder head with the engine still mounted in the frame. Push rods may pose a problem ?. Anyone know ? I have a photo...
Hi All Whilst out riding my R25/3 a few weeks ago the float bowl lid and its screws decided to come undone.......I know find I need replacements! I need a...
Howard, Just about any dealer that sells classic BMW spares should be able to help you with a bing carby float bowl lid. I don't know where you are located but...
... Yes, there is plenty of room to remove the head and there is nothing in the way of the pushrods. I have done it several times in chasing what I thought was...
... Go to Huggett GmbH at www.bmwbike.com. Click on the Online Store and enter Bing in the part description. There will be couple of screens of Bing carbs and...
Does anyone have a spare R27 frame & engine to sell ? preferably with matching numbers. The frame should be straight & undamaged, if the original headstock ID...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=49977&item=4504367801&rd=1 Why do people do this? Did they really think it's a good idea? Marco...
Hi, YES, I have a frame, but alas no engine to put in it , hence no matching number. But this should not be a rela problem to solve. For its good/bad shape...
