... pretty certain its a c6 automatic. as the 302's had the aod and the c4 as the e40d didnt make it into them until 1989. ( the c6 is a very stout and cheap...
man i need help with my starter........it has grinded my flywheel up and ruined 2 starters 1 was brand new.......any info or stories about 351w starter...
UPDATE: FOR 83` BRONCO 351W C-6 TRANS 4-WD THE FLYWHEEL IS O K BUT I WOULD HAVE SWORN IT WAS SHOT......... SOUNDS LIKE IT WAS BEING GRINDED TO BITS...............
... being an 83, this was a large changover for ford, many engines went from internal balancing to external balanced engines.........including the 351. and...
the trans is the original and the tin is in place.......... i did put a ford starter spacer in place and it worked for 1 day & then started to grind again &...
... I couldnt tell you the exact differences in the tooth count without digging deep into some older archives for sure, but what comes to mind is like 138 or...
does anyone have any info on how to remove and replace the caliper slides for a 1983 bronco ? also what special tools do i need to remove the hubs ?...
... if my memory serves me correctly.....the disk brake set up should be the same from early 1985 all the way back to 1973 for full size broncos and half ton...
thanks for the responce ! you are right...........the 9/16 bolt and the little slide is what i have. any educated info on how to re-set the `bearings in the...
usually, you tighten the inner spanner nut to just about tight while rotating the rotor.....then back it off around a 1/16th of a turn but not so much as to...
I just reviewed the last posts on brake caliper removal and I believe the answer to my question was in there regarding the spanner socket, but I just would...
I do not want the entire group seeing these photos.Because some may recognize me. Here's the link: http://sexyriders.zoomshare.com/files/photos.htm Enjoy babe...
any idea which way the flywheel mounts ? i think the flywheel is mounted backwards.............when i look at it through the removable plate on the bell...
... ...........that would expalain all of the weird starter issues.......however........not sure why the torque convertor would bolt up, and if so i would...
any info on the brake equilizer that is under the hood that connects the front & rear brakes ? mine seems to be dangling .......i guess it works , but i would...
O K..............I HAVE HAD PEOPLE TELL ME THE FLEX PLATE BOLTS UP WITH THE WELDED ON BALANCE WEIGHTS POINTING TOWARDS THE TRANS..... & THAT THE WEIGHTS SHOULD...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
